piston

2010 FE450. Got teh bike with 18h on it. No idea on hours now, but it's approaching 10,000km and I figure I should probably do some service. Nothing wrong. No indication or hint of anything out of spec. I'm sure the valves have gotta be at least a little tight by now, so I was going to tear it...

I finally got all my parts back from various places for my 2000 FC 501. I don't have a piston ring install tool. So I tried the following being very careful, but gave up right away before I had done any damage. Maybe I could have done it the opposite way, but that's not what I did. So I...

Hi, I’m interested in checking the condition of my piston / rings. Will the top end come off the cylinder with the engine in situ or do I have to plan on removing the engine? The space looks pretty cramped, but maybe removing the rad frees up enough room? Thanks. C

Hello everyone. I am brand new to this forum. I'm in a pinch and need help. I need to replace the front brake caliper and brake line on a 2011 FS570. I tried to buy the OEM replacement but the part is no longer available. Our caliper has a hole in it. We tried to repair it but it's not...

Good day guys: Husaberg 390 loosing mineral oil into engine after it sits for a week or more, I'm sure it will get worse in time. Does anyone have a part number for the seal on the oem slave cylinder ? or a recommended fix besides replacing the complete slave cylinder? thanks

Bike has approx 200+ hours and I'm going to check and possible replace piston this winter. Can someone give me the procedure on how to determine if I need the 94.94mm or 94.95mm or 94.96mm piston?

Hello, I bought a 2001 fe400 with a 2001fx470e engine in frame off and old man a month back and have blown it up twice already. First the bearing for the counter balance broke, not too big of a deal fix that and rode it for 15hrs and it seems as though the rings on the piston have let go. Was...

Hello guys. Got a 650 from 2002 with a later model engine. The previous owner did put a new piston in but could not get it running. I did by cleaning carb but under throttle cooling fluid came out. So retorq the headbolts and then piston started hitting The head. Is this piston to long...

Somebody knows the size of the handle? Unfortunately renovation kits are very expensive

Hallo everybody, I would know if is possibile to chance Houston and cilynder from 390 to 570 in my 2012 bike and what the parts I need to chenge in electronics or mechanical. Thank you everybody, I' m from Italy and my English is not perfect. Arrivederci e grazie.

My 2016 has done 100 hours and needs a new piston. I got the guage out and measured it https://photos.app.goo.gl/Ry5txggWs4wPnHam7 Apparently there is a number on the side of the engine either 001 or 002 that tells me which piston to order according to the husky dealer Anyone know...

Hey all, I have a 2006 fe550 with a 496 kit in it. My brother was thoughtful enough to fry the piston. Does anyone know what pistons are in these kits? Wossner? Thanks, Doug

Has anyone fitted a 570 piston to the ‘09-‘12 FE450? Without measuring I can see about 2-3mm more deck height with the 570 piston. Looking at the crown design it looks to be fine to remove the difference. It will put the comp ring closer to the crown. Is this a problem? Do we have much squish...

I am looking for a ring set for a Husaberg FC550 2001. MARS Husaberg FC550 KTM 250SX 2010

I've been told my piston is at the end of its life. However it looks barely worn. There are no big gouges and the crown looks good too. I'm wondering how it can be worn when the original machining lines can still be clearly seen? Surely if it was worn there would be marks. This is the piston...

Hello mates. I'm in process of organizing total rebuild and major upgrade at the same time to 2005 Husaberg 650 engine. I'll have Travis do all the work for me. While doing so much work I've decided to go for 104mm big bore kit. However pistons are a bit of a problem. $300 ea and minimum 4 to...

G'day guys, How would the Beringer 4 piston caliper perform with the standard master cyl compared to the standard caliper, or with the Beringer master? Thanks guys.

Hello team Took the day off work today and am just about to remove the standard conical valve springs and replace them with the Kibblewhite DVSK (thanks again for all the advice in regards to this Bushmechanic!). With the head off the piston and valves are all clearly visible. This is what...

Hi there, Recently, I think I've started noticing a different ticking sound coming from my 2011 FS570, which has 140 hours on it, and around 9,300 km. It hasn't been ridden particularly hard by me. No long distance high revs, mostly just braaping around town cracking small wheelies. I've been...

Should the ring be with the chamfered side up or down? 650 02 model :) Got confused when my old piston had it pointing down, and my new(used) have that side up... Andreas