needed

My '02 FE400 needs rebuild.However,I can't managed to remove the swingarm shaft. it is badly stuck in its place.a couple of blows with a hammer dd not work. I also tried to pull it off by screwing the nut on one end and by using a suitable spacer between the frame and the nut but tightening the...

First up hello to everyone, and congratulations on a great friendly multinational site!!! Well as you can see I need a bit of advice as to whether to buy an 08 FE or FS with respective SM or enduro kit. I previously had a KTM sxc 625 with a SM kit and found it fine on road but lacking...

Howdy all, u may have seen my recent replies to the "exhaust leak" post, & I'm not sure if I'm going to be fixing this tail pipe problem any time soon.... Just as an alternative, does anyone know of a good (noisey!!) race slip-on muffler that does not require different pipes for a 2004 FS650E...

Bought a second hand 450 sm just attempted first oil change. Loosend of plug 1 which felt 'locked' up to start and then it just starts spining and trickling a tiny bit of oil. Cant get the thing off or tighten it up, have a bad feeing about this one as the oil screen bolt is also locked...

Hi There! Can anybody tell me the best place to order a carb intake boot for my 1999 600 Berg. And I need the airfilter elbow boot as well. Thanks!

I need a clutch inner hub ( part 230 006-01) for my old ( now my sons ) FE400 1999. he took a hit on the clutch cover and managed to break one of the bolts, ie the female part that is welded to the inner side of the basket sheared is broken so i need to replace the whole inner hub,

Hi this year we are running a two bike Husaberg FE650 team in the Australian Safari rallye. We are currently looking to see of there is anyone out there that would be interested in coming along as a mechanic on the team. MUST have experence in Bergs re general servicing and engine changes...

Hi all, I currently have a front rim (1.60 ) and hub to be reassembled on an 03 FE650. As it will be sent off to a shop as I dont have time, I need to furnish the guy with the offset spec for correct alignment. Does anyone have the dimension from edge of rim (widest part) to outer edge of...

Hello, I need a good quality second hand clutch/transmission cover for my 04 fe 450. I've been given some leads from ss racing but I thought I'd put it on here too. I'm not going to go into things too much, but to cut a long story short after my engine was totally mangled by some f***wits, it...

Can someone tell me, preferably in not too big words :D , what exactly does the regulator and the regulator/rectifier do in the electrical system of a Husaberg. I've let both out when I redid my wiring loom and both front and tail light blew immediately when I started. So they obviously need...

Hello all; I am looking for any advice on aforementioned model. I am new to Husabergs (have owned many Jap bikes & two KTM's) I have found a very nice example in excellent condition, but am nervous because I have heard conflicting reports. Some say all pre 2003 "Husy's" are problematic; Local...

Hi All, I'm getting sick of trying to start my 2003 400FE, I can start it easy enough from cold,several kicks and sometimes even on the E start. Problems start when its hot,it will stall,and will take up to 3/40 kicks sometimes,drains the battery after 3-4 trys(new last year apparently) and is...

As some may know, I have maintained the Wikipedia Husaberg page for the last year, even rescued it from an attack by the infamous Motoclown (I kid you not) and I'd like to add some photos about the 2009 model, but they need to be personal photos released of their copyrights by their authors...

Hi guys since now having my bike for around 7000kms and not changing a thing on it i am wanting some input. I weigh about 100kg with all my gear on etc 1. After changing gearing from 16/45 to 15/45 the big girl now wears me out in the tight when i try to mix it up with the 450s. I liked...

ok so i originally had two teams of 4 ready to ride, but- work, injury or other has left me and one other guy for a 4 man team. i need to guys to step in and race with us. The track is a 18 mile GP that takes 45 for fast am guys and 34-37 for the pros to get around. we will be competing in...

See Pic Firstly I have not been riding with my foot on the brake. I replaced pads in rear calliper 3 rides ago and noticed I couldn’t get the old ones out unless I cracked the bleeder and pushed on the pads. It was very hard to push it all the way back to normal position which...

i went for what turned out to be a very short ride today on my 01 470 i noticed a graiting sound coming from the engine i stopped it right away when i got home after getting a lift in a van from a friend of mine i stripped the engine down right away.. the main bearings have gone one of the...

Gday Guys I have a list of parts and am wondering what i can get OEM and what i can get KTM and lastley what I can get from Berg. Can you guys help me with any of them (Part numbers etc etc). I have an 05 650FE. Any help would be greatly appreciated. Cam Chain and Joining Link Cam...

hi i have just brought 2 husabergs from the uk to greece where i live to get the greek number plates i need a copy on an eu cert for a 2001-470 2001-650 and a 2003 -400 i know each cert is specific to each individual bike but they are not that bothered here just as long as they see a...

I note that there have been some custom vinyl stickers made by some of the UHE members at some stage, not sure where i saw them now. I was wondering if anyone may have the HusaberG logo as either a 'Vector' file or an EPS file for the graphics dude to use?? I have no Idea what all of the...