needed

My 2005 FE550 coolant reservoir sprung a leak. Anyone have one for sale or know where to get one? I tried Cyclebuy and they are no longer available. I looked at the Motion Pro tanks, but they are too bulky. I'm also considering fixing the leak with special tape or adhesive.

Hi guys while mending up my husaberg fe501 '97 I discovered that my suspesion was somehow upgraded to not a serial ones. Here the trouble comes I did clean the inside,changed oil and inner seals on forks. While I was trying to find spare dusts seals I failed. Can't find this type...

G'day I have a 2002 FE501 I'm trying to find a clutch kit but have had no success! What other years are compatible with the Fe501 clutch or even other husaberg models???:(

My husabergs rockerarm rollers said kaput and i need newones.. i asked these from reseller but they couldnt order them from importer. Do you know where i can get these?:unsure:

I am based in murcia and 2002400fe has given up on me dose anyone know a good mechanic in this area of Spain?

Just bought an 04 FE450. I am looking for a steering stem nut and a kickstand that fits this model. There is one on ebay but it is for an 09 FE390 and I think it is different. Anyone have these parts? It has a Scotts Steering stabilizer but is missing the connection to the steering stem and the...

hi i have a husaberg fs650e 03 model i could do with ignition/key complete or even better full electrics /speedo so ino how fast im goin thanks pm me prices and postage im in Lancashire uk

I have an '04 FE650 and have a first world problem; the exhaust burns holes in my pants legs on the left side. It doesn't seem to matter what kind of material, I've got holes in my cargo pants (yes dumb choice), my kevlar jeans and my nylons. Does anyone here know of some sort of heat shield I...

Hi there, Im looking for a crankshaft to suit my 2006 650 FE, i had the primary gear crack through the key way groove and lost a tooth without doing damage. The problem is it ran loose for a while and ruined the key way groove and scored the shaft on the crank so somebody may have...

Has anyone got the wiring schematic for a 2010 FE570 UK spec? I'm struggling to get the horn working. Switch is ok, but no volts getting to the horn. (Horn works ok direct off of a battery). Had to cancel the MOT test today because of this-can't ride it on road till it's sorted. Husaberg .com...

i've done front brake pads plenty of times but never come across this. i put new pads but no matter what i do i cant get enough space for the disc to fit in... see pic below. i've made sure the pistons are depressed as far as possible. they are about 1mm shy of being flush with the caliper...

I am wanting to have my 2010 FX450 running in the most aggressive MAP setting and have considered buying the adjustable map switch to do so, but then I heard that this bike comes from the factory already in the "aggressive" setting. If this is the case, I'm assuming the switch would be a waste...

Brand new to a 2005 FE550E. Bought it Friday, went riding and a stick jammed itself between the front sproket and slave cylinder and cracked it. Contacted Sutto's to order it a they said approx 4 weeks for delivery. Is there another option or uprgrade or ????? Thanks

I'm having some trouble installing new throttle cables on my 2006 650 and could use some advice. Is there any tricks for getting the cables inserted properly into the housing they sit in on the handlebars? Thanks!

Help. Can anyone tell me where I can get a rear mudguard for a 2000 husky boy 50. Cheers. Paul.

Hi All, This is my first post, I'm proudly the new owner of an 06' 650 with just over 140hrs on the meter. I have not ridden the bike further than around the block, and it runs awesome, but upon changing the oil, there was quite a substantial amount of aluminium (nonferrous) filings in the...

i have fs 650 e its a 2003. it starts not too bad starting cold about 20 kicks ran it 40 miles and stopped then took 1 and half hours to start and in that time never even tried to start eventually had to bump it to get it going. one bruised foot and ego later i am pissed off with it only been...

Today out with my pals who all ride r1s gixers and the like I was flying on my berg fs650 sm setup when riding at a bit pace in 5th suddenly a big drop in power then I pulled clutch in to change down and engine just stopped let clutch back out and berg pretty much locked up???? Please help I've...

hi guys could really do with some impartial advice as really unsure on what to do so here we go. i bought a 03 650 fe of a m8 of mine for 1500.00 and spent 500.00 making it alright the bike had had **** load spent on it i had receipts for over 1500.00 of work that was done to it and the engine...

hey all... im in dire need of some 08 fe550e parts and cannot convince the mrs to let me pay full price!( which is ridiculously expensive where i shop) so any help would be appreciated on sites to buy cheaper parts from, 2nd hand parts etc... i need; radiator, radiator fan, guards, braces, rims...