needed

hi im after some advice i have a husaberg fe650 supermoto 2003 and i need to adjust my rear shock never touched a rear shock before what i have found is my rear wheel is touching the exhaust from time to time must be when its wheeling so i need to firm it up abit ,i have already tightened the...

Hi, Any clues what might happened, i did quick "all in" acceleration today, and after that i noticed that the bike smelled like burning oil, and when you rev'd it from the idle, it puffed oily smoke. I checked the airbox and there was oil inside it. I restarted the bike, and "feeled" it a...

I just won a Rekluse Z-Start Pro Husaberg 450 550 650 2004-2008 RMS-826 on ebag that is new in the box.... this is very convenient becasue my "new to me" Fe450 has a failing squealing clutch. :mrgreen: so, my questions are plenty, of course. will my stock clutch cover work with their...

hi guys im new to this site ive just bought a 650 off my mate after it hurt his ankle trying to kick it ,the problem i have got when we start the bike it sounds like the kick start is still engaged even tho its not as anyone else come across this problem as im just puzzled now :angry:

I'm working on getting a 2001 fe650 sorted out. Do I need to keep the manual decomp if I have installed the upgraded cam and auto decomp? I'm wondering about converting the lever to a choke. Or am I better off leaving the manual lever for kickstarting? Thanks in advance

Hi fellow Berg owners,I've recently bought a 08 FE450 and I'm so far very impressed with my bike.I've had a few KTMs and a heap of Japper two strokes.This little chestnut leaves them all high and dry.I have just purchased a Motard kit and need to get the bike road legal,I need a few electrical...

ok I've just fitted the correct rated springs to my 09 fe450, (4.6 front, 80nm rear), forks have new motul 5w oil with a 110mm airgap. current clicker and preload settings are the standard out of the manual but with an extra 3 clicks of rebound each end. I raced today and it seemed alot...

I've been looking for an oversized fuel tank for my '08 FE550 for some time now. I've also been hoping to find an under-seat tank as well but that's not the point of this post. Found a guy on Craigslist claiming that the 5 gallon tank he had on his KTM 525 will fit Husabergs and Husqvarnas...

Hi all, I need to replace the cam on my 2004 FS650 motard as it is very pitted. The cam that has come out of the bike is a 08 3/3205. The engine is completely standard, and runs the full Ti Akro exhaust. The bike is used for race/street use and I like the power delivery it makes. My question...

hi i have a 2005 husaberg fs650e and was out playing last night and came onto a long straight road and opened her right up for about 2 miles when i came to the lights and stopped it was making a ratteling noise from the engine when i got bk i checked the valve clearances and the were ok so i...

Hi guys! Clutch related question for you. There is 7 steel disks and 8 clutch disks. The repair manual says, that you have to install first one of the steel disks then clutch disk and so on.... Okey, no problem there. BUT one of the clutch disks have only friction material on the one side...

iam looking for a 5ltr ally tank for a 02 650 can anyone tell me where i can get one or does anyone want to sell me one ???? thanks

I've been searching the threads on here and it seems the consensus that the stock Dellorto carbs are no good. I've got a 97' FE400 which has had carb problems since i bought it a year ago. I've tried lowering and raising the needle and adjusting the idle and mixture screws to no avail. This...

hi im andy and am new to this forum i have just bought a 2000 fe 400 have currently got the engine out as the barrel has a slight oil weep along with the clutch cover the person i bought it from had a new head fitted it has s.t.c. stamped on the side can any one give me any info on it had it...

Hi all if anyone has a Akrapovic slipon for a fe570 for sale plz let me know. Thanks

hi has anybody got a rear wheel to fit a 2009- berg (18") preferably a blue d.i.d. one cash waiting thnaks

Hi Guys, Just need some quick help pleas, have tried the repair manual (really thought my answer would be there) and the doc but to no avail :?: I am in need of the part numbers for the two rubber seals in the steering head, I have souced the bearing no's but need the seal as well. 2005...

Hello all, went for a snow rode yesterday and lost my kick starter. Anyone have a kick start arm and bolt for a 2007 fe550? The starter don't like the cold and the snowmobile trails are calling me!

My FE 650 starter was slipping. It came time to dig into the bike and get it fixed. I went straight for the Torque Limiter, planning to shim it. To my surprise the "disc spring" or "spring washer" had a section broken. Now the disc spring has like a piece of a pie cut out of it. This is...

Heya everyone, I had this fantastic list of things I needed to add or alter to the UHE on my work computer but an impressive storm last night ensured that I'll not be working with that list any time soon. I'll soon be finishing up the classifieds system, so will be moving on to other parts of...