issues

I know most owners have had issues with starting at some point especially 650 so i want to share some tips with you that ive done recently as my 650 FE 07 now has the problem. I know bigger starter motors have been fitted but ive listed some info that may help, my argument is how come they work...

The information I have found on this site is why I donate to the site. 2010 FE 570 starting issues and fix Well over 6000 miles with a Rekluse For the last 800 miles the bike has progressively been getting harder to spin the engine at a constant starting RPM. Engine would stall (stop) cranking...

hi all i have a 99 501 where the decompression system is operated by the kick start mech, good idea i imagine but i cant get along with it. is there a mod or any way in fitting a handlebar decomp system off another bike that anybody has done instead of the kicker mech? also im after another...

Ok the starting isues are back! Dead cold the bike sitting for two weeks I turn on the choke two primer kicks with the decomp in then find TDC. I give her a good kick and she starts idles for about 20 seconds and then dies. After she quits it is almost impossible for her to start again. I did...

Hi guys, I have a bad stator in a 2000 Husaberg FE501, I see on that on the main page under owner doc, it says Flywheel and stator from KTM LC4 motor. This is the same ignition unit used on '03 and earlier Husaberg motorcycles with exception of lighting coil wattage output. (Sandskipper) So can...

I bought a very low hours '05 FE550 last spring and have never been completly happy with the carburation. It has always started very easily, idled fine, accelerated cleanly with no bogs. The original owner had installed a R&D adjustable leak jet kit including ACL pump spring, raised the needle...

I'm about to buy a husa and found a fe 501 -00 for sale and it's for 1400euro. Is there anything that I should pay attention to? Some say that this year is the best gear of husa since it's the old engine and the new chassis. Do you agree? I'm pretty new to husa, I've tried them before and it's...

Hi all, put a Hyde skidplate on my 08 550 recently and have a feeling the bike runs hotter now. Does anybody have overheating issues with this skidplate? Have you tried drilling a few holes into it to improve airflow around the motor? Thinking about that and would like to hear some opinions...

My good buddy (brother in law) is potentially buying a 2007 FE450. It's got about 20-something hours on it, and I'm wondering what major issues should I be looking for? I am the closest thing to a 'berg expert he has, so I'm just doing a little due diligence before he pulls the trigger. I...

Hi there guys. Got a few questions that maybe someone can help me out to find the right solution. 1- When Accelerating hard say in second the handlebars shake round for a bit and nearlly kicks me off(head shake if i'm not mistaken)Would playing round with the front suspension setting help this...

A growing number of Fe390s owners experience clogged fuel screens in the tank. Happened on mine after 2hrs. http://www.thumpertalk.com/forum/showth ... highlight= Here is the Thumpertalk link to the full tread. But this is the symptom: 2010 FE 390, 2 days old. Aggressive Map setting, dealer...

Hey Guys....Any issues I should be wary of concerning before purchasing an '09 FE570??

Yesterday i bought myself a FE 400 03 model. Outside it's great condition and everything works good but i have trouble with restarting the engine. When it's cold i pull the choke on, and fire it first or second kick with kickstarter every time. But when i try to restart the warm engine with...

Hi all. I have a 2004 Fe450e with only 80 hours on the hour meter. Now, here is the issue. I tried starting it and it cranked over then just clicked, the battery was dead. Well, I thought it was the battery. Anyway, I disconnected the battery and took it out. Shortly before that my enduro...

what issues have cropped up so far for those with a 2009 model ?? we have heard a little about the KTM cam chain tensioner, but it seems like its a very limited problem and easily fixed anyone have any problems so far with the EFI system ? either injectors or fuel pumps etc ?? anything...

Hello there , having a major issuse with my bike at the moment.At any more than half throttle the motor dies of and does the big back fire/loss of power act. When I first got it the bike was a real weapon,super quick/wheel stand in top gear ,etc.first race day of the season flew through most of...

do broken valve springs deserve red alert status? http://www.husaberg.org/index.php?name= ... pic&t=8968 ever seen a tappet locknut that can move laterally 1mm before? http://www.husaberg.org/index.php?name= ... pic&t=9014 did you know that virtually all our linars are technically junk...

Hi! My friend just picked up an FE400 ´01 - and went out with me yesterday, only to spend a fair bit of time trying to get it to fire up. When cold it started fine, but after 20 minutes worth of driving, we stopped to regroup, after that it didn't want to play no more. He's going to go...

Anyone had any valve issues with their husabergs? Perhaps certain years have had more issues than others but in particular the 06, 07, 08 bergs?????

All, Here is the BRC news letter that I got back in October. It outlines what the Blue Ribbon Coalition has been up to over the last year. For those of you in the states, I encourage you to join the BRC as I feel they are the most effective of all the pro access groups. I am going...