issue

The light appears to be on all the time. But when I pulled in the brake the light SLIGHTLY goes brighter. I was trying to get my M2 license and first they check your bike, the guy couldnt see it and so he said it was not working. How can I fix this in a timly manner? 2005 FS650E 1500 km/s...

Ok, i think i may have mucked up here and need some help. I removed the upper triple clamp on the berg and replaced it with a BRP clamp off of my ktm. The reason being the BRP has the risers and sub mount kit all attached for my scotts damper and is a nice bit of kit. So i fitted everything...

Last Sunday my bike was having a problem starting. Felt like the battery was dying or not getting a good charge. The bike has 15.5 hours on it. I opened it up to do the 15 hour service and found the problem; the auto-decompression weight was broken. Strange...now to see how good their warranty...

I just bought a 06 550 and the seat doesn't fit so good. Does any one know a easy fix ? I think I can either set the tank screw in the tank deeper or melt a place for the tank screw to sit in deeper. What do you think ?

My 570 has refused to turn over properly three times. The first time I coasted it for a bump start and after an hours ridding time it cranked over as it should. Next day it cranked over and started right it. Two other times it not had enough umph to turn the engine over. It is only a few eeks...

Hi Folks...I have read a few post regarding a similar issue with the starter motor on bergs but usually they are older models. I have a 2008 FE550 with one season...2500KM on it ....the starter problems began late in the season last year. it spins without engaging one or 2 times before finally...

Need some help finishing up dual sport lights. I have a new euro wiring harness, factory hi/lo/off switch and a dual filament bulb. Anything easy to check as to why its goes off / lo / off instead of Hi ? Spring's here, need to take off the studs and get road legal. Thanks for any...

Hey, As I've decided to keep my '07 FS550E and race it this year (it has under 500kms so far) I've begun to be concerned about this loose crank bolt issue some people have mentioned. Is there a step by step to check this?? I'm pretty green mechanically, can do my own oil changes and...

I've got a Fe400e.Yesterday he died on competition in Wales.It's the spark :? :? I've check the connectors, they're fine.The spark is very very weak.I've check stator coil.That black plastic got some cracks on 3 pick-up poles.It's a SEM.Anyone knows what's wrong with it? Any ideas for checks...

Is this the first and only photos of the New 2009 FE450. Cylinder canted forward (70 degrees!), FI, polyethylene sub frame. Wow. Any other mags with more info. Husaberg's back at the cutting edge. Sean

What Main jet are you guys using on your 550s? I have a little hesitation bog when landing and nailing the throttle in third gear. It scarred the you know what out of me last night doing a double and it happened every lap. The track had a table top and when I would land with a short run to a...

Dirt Rider used their long term 2006 Husaberg FE650 which survived last years 24 Hour Test unscathed and ran it again in this years 24 Hour Test. It survived! Other than a loose battery connection, the bike ran FLAWLESSLY!!!!! I do not recall Dirt Rider ever using the same motorcycle for...

I am working through the final details of cutting in a keyed ignition and a buddy (who is electrically inclined) noted that he felt the yellow/red primary power feed for all the accessories was pretty small gauge - looks like 18-20ga. He felt it should be 16ga minimum - I tend to agree, but...

Hey guys, its been a long time since I posted on this site, I always lurk and find the answers I need. I have an 03 400 fe with 115 hours of hard riding, with no problems until now. It started with a tapping at the front top of the head, assumming it was the auto decompression cause it just...

Was out yesterday and bike would refuse to start on the button it just spun over plenty of life in the battery it just wouldn't go pull out the kick start first kick and it would go it is a totally standard 04 450 force model done about 40 hrs tappet were set about 4 hrs ago any ideas...

I know I know I am beating this dead horse but....... 2005 FE550, Tried the check valve that Dale recommended both in the stock boot and in a jumble of hoses and tee fittings. Still passed oil and I thought the problem was that I had nothing to catch the mist and let it turn to liquid again...

Was out on the 2002 650SM last night in cold weather hacking it along at about 70mph :wink: and she stopped firing but continued turning over. After pulling over I tried to restart using the kick start but she appears to mechanically lock :? The decomp cam on the side of the head can be...

hi guys, i have a silly question as i enjoy long wheelies a lot, i was wondering if under these circumstances(bike 90 degrees vertical with 6th gear) R.A.L. provide sufficient lubricationa to the motor. my guess is that especially the cylinderhead suffers big time :( oh yeah, the bike is...

Hi guys, I have a FC600, Model Year `00 and a small kickstarter issue. The bike is in pretty good shape and there is nothing torn up, just to mention!!!!! Sometimes when I try to start the Berg and don`t do the complete stroke of the kickstarter because the compression kicks in, the Berg...

what spark plug should i be running in my 00 fe 400e..just taken out the old one and its an NGK D8EA.....the new one i got from the spark plug guy is an NGK(R) DCPR8E..BUT it looks a milimeter or so longer on the electrode /earth ..i don't want to discredit this guys knowledge but i din't want a...