ignition

Hi everybody ive recently bought a 2003 fe400 and im in a bit of a pickle, ive had to replace my ignition keyswitch as it was nackered. My question is, in my hurried attempt to fit i removed the old one and didnt mark up my wires so now im stuck with a bunch of ignition wires which I have no...

Has anyone fitted a total loss ignition system to a 650 berg? This is for a road racing application and only 30mins of sparks are needed! Any info much appreciated, thanks in advance, canolman

SEM Ignition module 1999-2003. all models. I've had about 6 ignition modules repaired and customers ask for the 'race curve' as well. the first feedback I had was that it was 'better in town' but no faster. however, I sold one to a hill climber and he has used his for the first time...

I would like to add a Key or something similar to the ignition to disable the bike while parked. I use this bike as a dual sport and leave the bike unattended and would like to be able to make it a little more secure. Any ideas would be greatly appreciated.

Was wondering if anyone ever used an aftermarket ignition coil for stronger spark on Kokusan ignition models. Dont have any problem with original though. It is a thought only for performance reasons. A friend put on his 2 stroke Honda a coil that have twice the out put of our original. I read...

I have looked everywhere for the specs on my ignition coil and have been unsuccessful. Do anyone knoe what a good replacement ignition coil would be? Add a link if you do please

Hi all Just writing to share my experiences regarding the above product. Let me start by saying I own a 2002 FE 400. After my SEM ignition failed, I decided to try their CD5006D programmable CDI, supposedly for 'Husaberg All models (1999-2003)'. I got the CDI and hooked it up. It was kinda...

Hi! I'am owner of Husaberg FE400E from 2003 and ignition coil is dead.. :cry: Where can i buy a new one, used or repaired?!

I've looked for few pages but can't seem to find this information... Where is the connector for the ignition map switch to be connected to? Is it easily identified where it is and if not would anybody happen have a photograph of it? Cheers! Ron

I just had my oil changed and I previously thought the ignition cover was leaking oil so my dealer changed the cover gasket. On the first ride after the oil and gasket change I noticed oil leaking out of the rubber grommet which holds the stator wires entering the ignition cover. I need to...

Hello all Bike is FS650c '02. After a long winter in garage do not show any signs of live (no spark). Stator and vires ok. Man with good electric thinking says the problem is with ignition coil (dead). Anyone had this problem before? Is it rear or not on berg's? Is any other aftermarket coils...

Hi i have husaberg fe 501e (2000): http://www.motot.net/galleria/kuvat/kay ... 165918.jpg half year ago it started to twitch when i gave a bit more gas and finally it stopped working. spark was very small after that and now there is no spark at all. so do you anyone have some kind of values...

My FE570 is the Aus version that has no ignition switch. I bought a KTM 78011065100 switch as recommended on the Advrider forum. I cannot see the female 4 pin plug to connect to. How do you wire the switch up?

I have a Husaberg FE570 and I wants to reflash my 570 ECU with the 450 ignition setting. Anyone knows if that´s possible? My dealer says it don´t and Jocke Ljunggrens mechanic (his father) says it does. Any inputs?

Hi, Ive purchased another burg, but it wasnt running. Suposed stator problems according to previous owner. Has had new one fitted or rewound, not sure. Have assembled it all but still no spark. It is a 9th of 98 make and has the later SEM ignition system. Can anybody help and does anyone have an...

got back from a ride, pushing the bike away, brake lights are still working, check a hr later, still work, headlights, horn the lot. come out a week later, flat battery.... any dodgy relays to check to stop this? cheers

I have a intermittent bog/missfire on my '09 FE450. I am almost certain it is the plug cap. The brass screw piece that plugs into the spark plug was loose. I unscrewed it, had a look, reinstalled the spring, check it with a meter and no connectivity. I took it apart again, and noticed something...

has anyone found a mapping/diagnostic sotware for re-mapping both the ignition and Fi on the Husaberg? I believe that there may be an Australian company doing this? I guess Vortex come into it? I'm looking to get more involved in this now. regards Taffy

Hi, I am looking for replacement parts for motorcycle HUSABERG FE501L (year of release 2003). The parts catalog number is 250 285-01 Ignition complete 02- (flywheel, stator and cable rubber). The parts could be secondhand, but in working order. Please contact me if you have to offer this, mostly...

Ok I am new to the Husaberg 2 stroke world, just sold my honda 450r and bought a 2012 te250(USA), and I have an easy question: On the ignition mapping switch, what is "I", and what is "II"? I understand that one setting is smooth, and the other is aggressive, but which one is which? TX...