forks

i may get flogged for this, but i went back to the two stroke dark side after blowing my motor. i sold the rest of my 96 FC501 to another member who needed parts, but kept the front clip (wheel forks brakes etc) and bolted it onto my 89 Honda cr310. i since sold that bike and am buying it back...

Hi guys, I am replacing my fork seals on my FE400 (2002) which have the WP 4860 Forks. Having taking them a part the circlips (which sit underneath the fork seal essentially keeping it from being pulled out your fork as you ride) need replacing. Has anyone got an idea of where I might be able...

Can anyone tell me were i can find any 2nd wds air forks and rear damper?

Hi all, I just installed a Scotts damper on my 2012 FE390. I took a number of photos as I went just to make sure everything went back together the same way it came off, I'm an expert at forgetting how to put things back together. So after fighting with the forks and top triple clamp for about...

Howdy: Looking to swap a set of forks into my bike, and wondering what the axle lug offset (distance between the center-line of the axle, and the center-line of the fork legs - as seen from the side) is on the later model closed cartridge Husabergs (with the 48/60 forks). I have searched all...

My only issue with them is how much they dive under even light braking, is there a way to resolve this?? I have no problem going into the forks i just do not know what to do when i got there...... i dont race it, but want it to be somewhat race ready, i do get aggressive on the back roads...

Hi, I have FS some parts from my 570 Husaberg. WP 48mm forks made for supermoto - I will add spare springs for MX/enduro.. 350EUR WP PDS (only for 09-12 Husabergs) made for supermoto - I will add spare spring for MX/enduro.. 350EUR GDS triple clamps 14mm.. 220EUR Akrapovic silencer -...

Anyone feeling a complete lack of plushness on their CC forks? I have what i believe is stock fe570, and have had to turn the comp all the way off to soften up the fork. There is a LOT of midstroke harshness in the fork. Anyone try lowering the outer oil level on these with any success? How...

Hi guys Im in the middle of rebuilding the forks on my 03 fe 400, I got the forks apart and the new seals etc in place, I can't work out how to remove the spring / dampening rod. I removed a nut and a load of shims/ washers from the bottom of the dampening rod, and now there is a nut that I...

hi does anyone know how much the oil gap is in 09 570 front forks,and what size fork seal driver you need for the forks..

I've had my Fe570 over a year now and have been playing with things as and when I ride it. I've gone up to .46 springs on the front and 7.6 on the rear, although it's better i'm going to try a 8.0 rear spring soon as I feel it needs it. I did a race with a MX section and the bike bottomed out...

Hello Husa People, My first post here so hello to all. I'm just about to order a 2012 TE300. I have read many rave reviews of the suspension, in particular the fork. I own a 2008 KTM 300 with 2010 forks and I'm trying to get some feedback regarding the quality of the Husa CC fork compared to...

Hy Guys, I want to soften my high speed compression dampening and I believe the way to do this is to remove shims from the compression valve assembly, can I remove the compression valve from the bottom of the fork or do I need to dissassemble the forks or...... ?? Dale I would get you to do...

I have the Factory SXS closed cartridge SM forks on my FS570 Does any one know where I can get a service manuel for these so I can change the seals ta :bounce:

well my tech put 110mm air gap in my forks by mistake. :( how do i rectify it the easy way? :bounce: open the air screw and pour out of them? Regards

hi and just wondering why my forks seem to be low so when i put my bike on a stand with the front wheel off the floor the chrome tube measures at 265mm from axle to dust seal, i have looked at some ktm 525exc forks wich i think would be the same and they measure at 295mm has a preveous owner...

Just wondering what 'special' tools I would need if I decided to strip and rebuild my forks? Does anyone know of a good guide for someone who has never done it before? Thanks Ben

I was woundering if any of you have the stock stack for the Husaberg fe450 2011 CC fork. I`m having a 2007 sxf 125 CC fork and thought that the Fe cc forks stacks from 2011 should be a good start. The fork i have had ProAction valves in them so i got the stock ones and softer mid spring so far...

Do I need the buy 1 or 2 qts.of fork oil to rebuild them? :?: Thanks

What do you guys think about these forks.Why do most all the husabergs come with inverted forks and my bike has conv. forks.I have adjusted them all up and down and they seem stiff,plus the damn thing washes out so easy on sand.Are my forks high tech.Sorry for the bitchn but it has hurt me twice.