forks

Just ordered a full rebuild kit for my forks. What oil height should I aim for? Can't seem to find any relevant info on this topic. Besides that, anything I should particularly watch out for? Thanks

I’m in the middle of putting new fork springs on my buddies berg. The springs I ordered are 43mm x 505mm which from what I can tell matches the service manual for the FE models (open cartridge forks). The weird part is the springs that were in his forks measure 43mm x 485mm, which seems like...

I have a 95 FE and and 98 FC. They both have the WP front end but the FE has the upside-down version vs the standard version on the FC. What are the performance differences between the two types? (and which is better?) By the way, the front wheels are not interchangeable due to the different...

Hello everybody! Owner of Hsb Fe400 1997. I'm looking for a couple of forks guards guide (see picture attached: n° 12 ), in coulor yellow fluoroscent. Many thanks in advance Andrea

Hi just wondering if anyone could help me I’ve got a husaberg te 300 2013. With wp closed cartridge forks. I done a hare and hounds and blow a seal. I’m happy to replace the seal and I know the capacity is 607ml but would anyone be able to tell me how much in the bottom and top of the cartridge...

Hi all, I just bought a 2006 FE550E, it's my first 'Berg so I don't know a lot about them yet. When I bought it the shock felt nice but the forks were REALLY firm, there was no 'bike sag', barely any rider sag & the bike skipped off anything the front wheel would touch, there wasn't nearly...

I have noted that when I have nipped up my forks to Axel that their is a gap between the wheel bearing bushings, I think that it should be no gap, but looked at 2 other Bergs a mate had and they were the same as mine with about 3mm gap. I would think that there should be no gap at all, I have...

Hello Which forks do I have on my -94? They are WP upside down but I don't know the model number. Seems like I need new bushings as I have a little play that I first thought was the steering head bearing. But know when that's replaced it's clear that the play is between the inner and outer...

Help please guys. My 2012 390 front end feels harsh and firm on slower enduro type going. Is it worth trying a 2.5W oil? Play around with the shim stacks? Does anyone have a shim stack setup that would give a plusher ride on the slow rooty rocky stuff? Are there any aftermarket valve...

WP Suspension MXMA Front Forks Owner's Manual 4357 MXMA 4860 MXMA Husaberg Today's upside downers!

WP Suspension Extreme MX Front Forks Workshop Manual Husaberg More right way ups!

WP Suspension 4357 MX Multi Adjustor 2000 Front Forks Workshop Manual For 2000+ Husaberg motorcycles Your 43mm front forks right way ups!

WP Suspension 5060 Extreme Front Forks Workshop Manual For 1997-1999 Husaberg motorcycles

Any recommendations for suspension work in the Atlanta, GA area. Fork seals are busted and I am planning on re-springing the bike to my weight. Longer Story: Local KTM dealer appears useless, and said I would have to order the 'Burg parts and bring them in... when I explained they are KTM...

Hi, So I was hoping someone can help. I was going to get my suspension looked at and setup correct for my 390fe. Now when I bought the bike the owner said it had WP forks (and a sticker was there to "prove it') Now I'm led to believe the WP forks came out on the '11 models? and I believe...

Atlanta, GA area. Make reasonable offer.

WP 4054 Forks Manual

WP 5060 Extreme Forks Manual

Ok this is probably a stupid question, but how do I remove my front forks from my 2010 FE 450? Thanks!

Hi. I have just got a 2010 fe450. Loving the bike so far. I'm trying to setup te suspension and found that someone hadn't fit the cap on the forks correcty leaving me with a rebound adjuster that turned forever. I have screwed the cap down now and just want to make sure I have fitted it right...