fe570

PRICES lowered 12/29/16-Please PM so I get your message quickly All kinds of trades and best offers welcome. Here's a pile of stuff purchased from the KTM Dealer. I'll give priority to local pickup or the forumite who wants to take the bulk of it. If you're local, you can get a bunch...

Hi All, Just did a deal on an 09 FE570. Bike is pretty clean having spent most of it's 10000km on road. Picked her up for $5800 with a spare set of motard wheels and some other spares. Bike itself has underseat LR tank (unsure if 70 degree racing product or another), map switch, radiator...

I'm 315 and looking for a new rear spring. The Racetech calculator doesn't provide the rates I'm looking for with this bike. As an aside, any idea which KTM model shares this shock? I'm guessing there are more springs available for the KTM models.

FI warning light has been coming on after running bike for a few seconds for the past several months Bike runs fine Pump whirrs up normally on contact Original pump was replaced shortly after purchasing bike in 2011 when it began stalling No issues since Bike is pretty stock other than 70...

Original owner, new to this website, looking to see interest. I really enjoy this bike and don't have to sell it, but will let it go if price / location is right. Need room in shop, have various other bikes. It has approx. 137 hrs, oil changes every 6-8 hours, very well maintained. Current...

Hi, half through a ride yesterday the bike wouldn't start. Tow started fine. The starter motor doesn't kick in. Just a whining sound. Battery fine, 20A fuses okay. Starter relay engaging. It's also intermittent. When it turns over starts immediately Any ideas?

Anyone know where to get these?

Hi all! I am looking for the weight of the OEM FE570 connecting rod. Is there anyone who measured it or have the factory data? Thank you for your help!

My 570 came with a 1.8 cap. Not sure what the stock should be. It occasionally boils in hot single tracks. I made a simple reservoir/expantion system. It fills up the expansion tank when hot but never pulls it back in the rads when it cools down. Question is that should I be using a lower...

Trying to install a fuel level sensor on my berg and ran into a problem removing the middle bolts of the subframe all other bolts came off easily. Noticed that the middle bolts are both connected and could remove the left side but not the right. Can anyone help? #noob

Hi all! I am looking for the dimension of these OEM FE570 parts: Piston: -diameter -height Piston rings: -diameters Conrod: -length (from small end centre to big end centre) -small end diameter -big end diameter -thickness at small end -thickness at big end I can use any...

I have a 2011 fe570 with 108 hrs on it. issues started a week ago with surging when holding a steady throttle, progressivly got worse to the point where it would idle but on throttle of 1/2 or more it would die with whats sounds like a bit of a back fire. its now to the point where it will idle...

loving my Berg, don't get out as much as I should though.. went to the last Watagans Trail Bike rally recently and for the first time noticed the play in the throttle.:confused: Its not much but the more I thought about it whilst riding the more it bothered me :mad::mad: I checked the...

Hi, I gladly own two Husaberg: 2010 FX450 + 2011 FE570S. When cold, my FX450 starts in about 2 seconds. When cold, my FE570S takes forever to start. It can take up to 1 minute of crancking but I always get it to start. I've read about the camshaft autodecompression issues. My...

Hi All, Went for a night run through the streets on my FE570 and noticed that the headlight dims right down while accelerating. Has anyone else had this issue or know what it might be? I have not checked the voltage to the headlight yet bu I assume that there would be a significant voltage...

Hi All. Im looking at buying a fe570. Question i have is - It has a manufacture date of 7/2010. Does that make it a 2011 model. It has blue fork leg covers (i think that might have been white un 2010 ) Any other differences i could look for? Thanks Gene

Hey guys, Just bought my first Husaberg on the weekend, and I'm eager to start the mods! :) Picked up this 2009 for $3800 CAD and I think I did okay. - Rad braces - cam chain tensioner - billet parts - etc. First up - the 'headlight' you see on the pic is not connected. :) The...

Good day - new member here from Calgary, Alberta, CANADA! Just picked up a 2009 FE570 yesterday and looking to learn about my new toy. Riding street for a couple of years, but wanted to get back into dirt. My only other dirtbike was an 89 KDX 200... this Husa has a bit more jam. :) Looking...

I'm converting my FE570 to FS. What map should I load on to the ecu?

My FE570, Magura clutch, still creeps with the clutch pulled in. When I burp the throttle or put on brake, the clutch comes loose. As soon as I pump the trottle or put on brake I can feel the clutch totally disengage. Otherwise, it just barely still creeps forward. I've tried bleeding...