fe570

FS/FE570 parts: jet kit, big brakes Guys, I sold my Husaberg FE570 2011 (:crybaby:) and I am now selling my aftermarket parts. Prices include shipping in Canada and USA. For shipping elsewhere, please contact me. JD Jetting Power Surge 6x Fuel injection tuner In perfect working...

Hi, under the headlight there is a 6 pin connector that gets some if it's wires from the Key switch. This 6 pin connector is capped off with a male connector that has wires that cross over to make connections with wires within the connector and it is heat shrink covered. It leads nowhere...

I have a 2011 FE570 for sale. The bike is literally brand new with 518 miles and 21.8 hours. The attached pictures speak for themselves. I have added the following upgrades: 1. CA Cycle Works fuel pump 2. Heat wrapped exhaust (see attached picture) 3. Heat shield applied to fuel tank (see...

Considered selling my beloved 2012 FE570. I bought it new in Australia and shipped it over with me to the UK in 2014. Now done 1472 miles / 57.5 hours. Talon cush drive hub to protect the counter-shaft spline and gears, heated grips, I have low plus standard seats, Cyclops LED headlight...

Last ice race I attended I got pushed off bad, looped the bike and the brace for the front fender broke. Problem is I got it from a husaberg friend that got it in his turn, so Im not sure what bike had this oem? Guessing its from an mx model 00-08? Anyone recognizing this piece and can tell...

hello can anyone recommend someone to carry out a top end rebuild ? i'm in queensland, and have a 2009 fe570 with 140 hours on it.

Does anyone have the part number for a black plastics set....I can only find the Blue/White Thanks

I've been searching for 2 weeks and have been through 3 different brackets trying to figure this out and I'm at my wits end. I'm trying to find a 320MM Caliper relocation bracket for my 2009 FE570 so I can use my Supermotowheel. The last one I tried was the an EBC BRK012 but the holes for the...

Its been sold. Thanks for looking I bought this new in 2011 and am the original owner.. Its got all the cool stuff. Steering Stabilizer Tublis tires Handguards SubFrame fuel tank Heat shield blanket and pipe wrap Radiator fan Fork covers and skid plate Etc. I rode it mostly on the dirt roads...

With my Track/Race R1M in for a warranty engine rebuild, I decided to go hunting for SuperMotard track bikes. An acquaintance said he's willing to trade my 2014 CRF125BW + a reasonable amount of cash and it was done deal today. Now that I'm looking at it, I think I'm going to ride it on dirt...

I've put up a similar thread in the past but I have now just replaced the piston and rings, shimmed the valves, fitted a new plug and adjusted the TPS and I am still having a hard time starting the engine. It cranks over fine....nice and fast but takes a long time before it starts to fire and...

Hello Husaberg people, what an awesome forum. I have a 2014 TE300 and have just purchased a FE570. Super excited about it. Its bit rough, needs some TLC. Clutch slave cylinder let go on 1st ride, not surprised. The slave cylinder has a KTM logo on it, can't seem to cree reference it to a KTM...

Hi Guys, Trying to wire in the rear indicators for my FE570. Having trouble finding the wires, can't seem to find anything under the seat Up the front I noticed these connectors tied into the front indicators. Is this where the rear indicators were and they have cut them off or are these...

Hello fellow bergers! Looking for a 570 FMF megabomb and not the one for 390/450. If anyone has it and wants to sell, send me a PM

I have bought an ‘09 570 with a blown crank and cyl as it was starved of oil. I’ll rebuild the motor and this bike will be my trail hack where my ‘11 570 will do more adventure rides as it is setup for this. I have a new crank to suit the 610 piston and the piston kit coming over from Norway...

What is the Overall length of the 2011 Husaberg FE570?

Hey all. I just finished up a valve adjustment, my first one on my new FE570. It went according to all the tutorials and the book and was pretty simple. The only thing I'm worried about is I haven't seen any specific info on installing the cam chain tensioner and I don't want to mess that up...

G’day Guys, Got the 570 back from the dyno. 59.5 hp. Akro without insert, opened up airbox by cutting up the seat and shrouds, 450 airbox. The green line is with the seat removed, so it pays to relieve the airbox. Look how the remap performed against the Vortex.

Hi all. Just bought a 2009 FE570. Loving it. Trying to figure out how to use this forum. I’ve already learned so much just from lurking for a few months. Looking forward to your helpful advice! ~Jake

Hey there, Berg nerds. I’ve been lurking on this site for a while now. I was shopping for a bike to back up my DR that’s been modded to the max. That thing is still heavy and lazy so I wanted to rip a bit on a lighter, smaller displacement bike. I figured a 350 or so. I shopped around...