fe400e

I need new Roller Bearings for the rockerarms for my 2003 FE400e. I was sent updated bearings which do not fit the rockerarms and there seems to be no supply of old style bearings in Australia. Apparently I can purchase the new style rockerarms to take the updated bearing by these are a few...

Hi, I am really interested in this model. There is one at a local dealership, where I live. They have had it for sale at $4500, for a long time. I have checked it out a couple of times but always thought the price was too high. Anyway they have now asked me to make them an offer. My...

I can't find the air bleed screw on the head of my 98 fe400e. Is there one and if so where is the darn thing? The manual says nothing about it. Thanks, Roger

I recently bought a 98fe400e with a baja designs kit. It all works fine but the wiring under the seat is a rats nest of wires running every direction. This will not do. Also, there is no key for the bike, just a plunger switch mounted inside the subframe. I'd like to clean up the wiring and...

I just bought a 98 FE400E today and am looking for any advice as far as service goes before I ride it much. It has a Baja Designs kit on it and will be plated for street use. I bought it mostly for trail use and am concerned a bit about using up service hours on the street given some of the...

finished the rebuild tonight and will i hope race the bike tomorrow. below are some things i'm sticking in the owners doc. anything you care to comment on or add-feel free to do so... When trying to find neutral, remember the selector drum is 5 up, neutral and then first-now you can...

I currently have been running a 14/48 in desert (all the time) and mountains (only go about twice a year). I am heading to the mountains and getting my bike ready and my mate said maybe i should put a 13/48 on. Might be a little better. Can some one give me there thoughts. There is some...

I'm looking for a new 2003 FE400E. I just missed one at MotoXotica. I live in NW Ohio. Thanks Les [email protected]

I have an 03 FE400E and wanted to know it getting the button to make the speedo work is worth the cost. Currently it only shows the speed and hours I have ridden. What other functions are there that this button will allow me to use. Thanks

My 2000 Fe started acting up lately. The bike starts fine, about 30 seconds later it starts snapping and popping badly and wont idle unless you crank up the idle to the point it is racing. after about 1-2 minutes the Left exhaust manifold starts turning red with heat (at which time I shut it...

Does anyone know what the stock settings(clicks out) are for forks and rear shock on my 1999 fe400e......nsman

I went up to the mountains up here in Oregon to a place called Mckubbins. I stayed there for a few days at the ranger station where some of my friends worked. It rained and snowed all day the first day so we just worked on our bikes in the shop and hung out. I ended up putting Motorex 10...

I was wondering if anybody would know where to find a Fe400e,or a Fe501e,or a Fe450e in california

I just bought a 2002 FE400E. I wanted to try and make the bike as reliable as possible. I have read many of the tips about this bike including the famous spreadsheet of knowledge. Did Taffy make this? I had some questions which I would like to clear up. It just seems like a good idea to...

Does anyone know what weight fork springs were stock on a 2001 Fe400e?

I lost my spark arrester the other day - not sure what happened, but the screws that hold it on, are still there, but the arrester is gone. Where can I get a new one? Also, I would like to quiet this thing down a little. It has more than enough power for what I do, but is a little loud...

I have a 98 Fe400e that has been working well for me for the past 4 years. The last couple times out, it has been very difficult to start and does not idle well, if at all. Once off idle, it seems to be running fairly well. It has been flooding on occassion also. Is this a carb, or a valve...

Does anyone know a good jetting spec. for my 2001 Fe400e for altitudes between 8,000 and 12,000 feet? I currently have the stock jetting in place which is a 38 pilot and a 190 main. I have a 33 pilot and a 188 main on hand.

I just picked up a new 03 fe400e and the throttle return spring is much lighter than my 02FX470E Throttle return spring Id like my 400's throttle to have the same feeling as my 470's can these springs be interchanged?I looked at the parts manual and they only have one part number for all the...

Hi, has anyone used EBC brake pads? If so - how do they compare to standard, and what are the reference numbers? Thanks