Hi there everyone,I'll give you the run down on what I've done to my beloved Husa.........Replaced battery with 7A Yuasa,replaced starter motor,replaced stator, Electrex World SEM replacement,fitted iridium spark plug,adjusted valve clearances,stripped the carb, replaced the throttle cable.Ive...
First off what mm is my fork seal size,reading my manual is unclear,I don't have the WP manual.Secondly because I set my suspension relatively soft will this contribute to "blowing them" all too often.(2003 FE400E),,,Bless ya
I believe this to be true but can anyone out there confirm that the the KTM supermoto wheels fit straight onto my husaberg?The bike they are off is a 2003 450exc.....
Need some help due to total lack of Berg knowledge.Have re-silicon-ed rocker cover,replaced valve inspection gaskets.Bike now seems to be oil tight-ish from here,but it is definitely looks to be seeping around the head gasket,cam chain side,approx below the radiator hose,this seems odd surely it...
Anyone with any info would be helpful due to my overall lack of Berg knowledge.Have re silicon-ed my rocker cover,replaced the valve inspection gaskets,they seem to be oil tight ish but there is still a definite seep from what appears to be around the head gasket ,next to the cam chain housing...
I can't believe it,I've owned this bike for approx 4 months,battery failure,starter failure,leaking gaskets dodgy kick starting and now no spark.Strange thing though,love the bike and the fabulous "design characteristics".I followed the thread on the site but still a bit unsure on a couple of...
I've just purchased the above it has 880km (550miles) and has been sitting in a dealership for the last few years waiting for someone to install a new clutch basket.
For the last 6 years I have owned KTMs of the RFS variety and previous to that I had various Husky 410s, 510s and 610s. I've...
Does anyone know where I can buy new replacement (original equipment) neon yellow plastic parts for a 98 FE400e. I would like to buy both fenders, radiator shrouds, and side covers. Thanks
You've probably all been here before but whats the best battery to fit an FE400E,something with a bit of grunt and without having to modify the battery box.Rumor has it a Yuasa YTZ7S will do the job?.I just need to know if thats the case, will it fit without any mods and, will the cover still...
What sort of power do these bikes push out ? Ive ridden Yam 426,KTM 450,Honda etc and the Husa seems just about on a par,all my mates who ride KTM and Honda reckon the Husaberg only pushes out 19BHP,,anyone ? just to shut them up.
Hi there,new to the site,new to husaberg.Have a cooked starter ,wondered if anyone new of an equivalent non Husaberg starter that will fit.Have tried a R6 same part no sm14 but too long,help.......Regards Matty
Based on the limited feedback I received from this forum, I am passing on the chance to buy an 01 FE400E. They appear to have too many engine problems. Actually it sounds like the old style 1999 model would be best for me. If anyone has a pre-2001 FE400e out there and wants to sell it, please...
PLEASE provide any insight you might have fast. I plan to buy a 2001 Husaberg FE400e. I have been adivsed this year had engine problems with rocker arms and crank balancers. Would you buy one of these or not? I have no history on the bike. I like the bike but don't want to buy a problem. My...
NEED ADVICE QUICKLY. I was just getting ready to buy a 2001 FE400e when I checked with a berg expert in New Mexico. He told me to stay away from the 2001 and 2002 FE400 because the crank balancer was defective and the engines were not good past 150 hours. Most had already blown. Can anyone shed...
Hello - after a long search, I finally found a berg within my budget on ebay & purchased it. Its a 2002 FE400E and I am curious if anyone here previously owned it. The guy I bought it from is in Indiana and owned it less than a year & doesn't know anything about its history. The last time he...
Bike bandit has has part listings for 2002 and 2004 husabergs but no 2003??? when it comes to air filter, wheel bearings, sprokets, ect... is the 2002 or 2004 all the same???
Hey guys im new 2 this place and have been looking at a 1998 fe400e ive had yamahas and hondas and wanted to know what these bikes are like. i live in aus. the reason i was looking at this bike is the wrs are 2 expensive and i wanted 1 that i could register at one stage. it is a 1998 fe400e for...
Ok, so here is my problem (or my friend's anyway):
My friend mounted a new starter clutch on his 400 as it wouldn't start with the e-start. My first guess was a bad going battery but the clutch was already bought and so a bit later mounted also. But it didn't work either so I still guessed the...
Sorry if this has been raised before - new to this forum.
Has any one got a fix for the starter motor on the 99 FE400E?
It seems to be seized/not getting any current.
When it was working, it didn't seem to have any enough power to spin the engine, and it gradually got slower to the point...