fe400

hello all, i have now cross referred my loom to the diagram you helped me get- but now i have no spark does anybody know of any common problems 2001 fe400 road legal thanks for your help

Hi All OK first up - I feel like a bit of a numpty today - having taken my berg to dave clarke racing (berg expert) to look at what I thought was a starting problem - dave got it going in 2 minutes flat (drained carb and kicked it) - there were some other issues (valve clearances, plug &...

Hello All - newbie to this site and to the world if Husabergs...! I bought my 2003 FE400 2 weeks ago and have problems ever since!! Hoping for some help from this forum! Problem 1... I can't get the thing started at all. When I bought the bike, it fired up fine on the electric starter...

Hi I have a FE400 '00, still with original SEM stator and dellorto carburetor. Starts with kickstarter at first or 2nd kick, no matter is it cold or warm! And also starts with an e-start, but poorly. So the actual question is, is it normal that e-starter spins with engine? I took...

Hi I thought i had an electrical problem, which i probably did? (Heeelp! No spark FE400)Followed all tips from some wise men on this forum. And the thing actually started. But in a scary way, lots of smoke and oil spill from the exhaust headers. I suppose i got the valves wrong? I checked...

Hi My 2000 FE 400 suddenly lost power. No scary mechanical noises, and no loss of compression. When i got it home i found that there's no spark. My original sem stator seems to be just fine, measures 164, and 2960. My new stator is also within specs, - the name of this product will be kept a...

I have a 2000 (early) FE400, it has problems starting from the button when cold. A dealer I spoke to said that this model the e start is designed as a restarter only i.e. kick start from cold and then when the motor is warm use the button. Is this true?? It does start easier on the button...

I have a new cable to change the stock choke cable to a longer one for easier access but the plastic knob on the end of the old cable seems to be molded on there. Anyone know how I can get this off and fitted to a new cable (the new cable has the same nipples as the old one)? Any better...

Hi All and thanks for what looks like a great forum. I have just purchased my first ever Berg and am stoked with it but am looking for a bit more especially down low. I run a motorcycle wrecking yard in Australia and have a spare exhaust system off an 03 FE650. I have read the headers are...

Well I just stripped my carb to see what's there. I have :- Main jet - 185 Needle jet - 270DR Needle - K51 Needle clip - 2 Pilot jet - 35 Throttle slide - 4mm Choke jet - 45 mixture screw - 1 turn out #9980 idle emulsion tube is missing !! The bike runs pretty good but i do have...

just posted a report taken from a Uk mag published in '02 its avalible as pdf from our downloads section, bottom of page 1 of 'articles and reviews' bit of interesting reading for those with the 400.

Hi guys, just picked up an '03 FE400. Just thought I'd sign up and say hello. Seems like a great place for info. I like the little skill testing question when you sign up to the forum... Has it been working to keep the idiots off? hehe. Any way I'm in the greater Toronto area (Ont,Ca)...

Hi is it possible to lower the seat height of an 03 400 if so how do you go about it? it's just that i'm a little short in the leg shall we say. :?

Hi - can anyone tell me what the standard shock spring rate was for the 2001 FE 400 E ? Cheers.

I Am having a start problem with my Husaberg FE400 My bike starts very bad, especially with cold or semi-cold engine.. My procedure: -Both fuel loops set to 'on' -Pull my choke out and twist it 90 degrees so it stays 'on' -Switch my contact key to the right -Press my foot on the...

I have recently bought a husaberg FE400 Supermotard for 2003. It has only 3240km's and the bike is in good condition. But I have read a few things about the <'04 models have problems with the valvehitters/valvesprings (dont know if that is correctly spelled). and also the bearings of the...

Hi, i have a 03 400, bought it last year, and loved it.. used it nearly 100 hours with no problem.. but.. last week I did a regular maintenance, changed oil (or I thought so) but I forgot to put new oil in the engine.. guess what. I used it more than 3 hours after that. today while I was...

My bike has develop an engine miss from 1/3 to full throttle. It seems like its overfuelled and is running rich under this operating condition. Similar to running the engine when its warm with the choke on. I've checked that the choke isn't partially stuck on. I've pulled the carburetor...

Hi all, I just purchased a Husaberg Fe400 2002 which so far has been great except for the electric starter . It has a brand new battery but it doesn't spin up fast enough to turn over. I'm at loss, it kicks over first kick yet refuses kick over with the electric starter. Could it be the...

I bought Ned's 1998 FE400e and really love the bike. I often ride with my 9 yr old daughter next to me on her Honda XR70. It is difficult for me to coach her because the FE400 is a bit loud. Is there a way to make it more quiet. Perhaps an aftermarker muffler? I don't really care if I lose some...