fe400

Please forgive my stupidity Is the elduro the electric start enduro? If it is, do people run it on standard jetting? I bought one three weeks ago and it runs ok at low medium revs, ticks over fine, even starts fine (when cold) and up to around 3/4 revs and above. Then its ewwwwwwwwww...

Hi there, I'm considering to buy an FE400 2003, but I'm a bit confused since some guys talk about the e-start problem of this model. What do you think about this bike generally and specifically. Every opinion is very much appreciated. :roll:

Is this possible, its both downpipes and silencer. Thanks.

I've found a 99 FE400 (kickstart-only) that I'm considering buying, supposedly with only 2100 miles. I'm fairly confident it's a good bike; my concerns focus mostly on parts/maintenance/reliability. There's no dealer nearby that I'm aware of (western SC), but I'm a fair shade-tree mechanic...

Hey there, I have on 02 400 fe that I have owned for about two weeks. while doing my most recent oil service I discovered bits of a small bearing cage sitting by the oil scree. it turns out it is the cam bearings. I am in the process of tearing down the motor completely for inspection. Are these...

I just bought an '03 FE400... I was wondering why the exhaust does not have the "USFS Approved" stamp on it like the '04 and newer bikes? Also, what have you guys done when questioned by a USFS person??? Thanks in advance, Jason

Hi guys, I have some problem again: Bike started smoking like a two stroke (FE400-'99), for sure it's oil in the cylinder, it throws oil even from the exhaust! This started just like this, no obvious reason! I know the valve guide seals are worn, but don't believe so much oil can goes...

I very happy for my FEE400 98, i followed the hard to start manuel, and it now start at the button. On small traks its perfect, but when i run at large field i feell it stops rewing to early. I run standard all the way, and have tried with more timing advancing without any change. I know its...

A friend of mine rides a 400 FE. It has been flawless so far but now their are signs of a crack around the swingarm area. I have seen this on the forum before. Anybody have expirience with welding it without opening the engine (as we had planned to do)?

Hi All Its Been A While. Finally Got A Spare Afternoon Yesterday To Find Out Why The 400 Wont Start,Went Over Everything Again. Reset The Valves Again. Still Not Having Any Of It. Took The Rocker Cover Out And Found The Exaust Cam Lobe Completely Worn With Hotspots Where All The Hardening Has...

Was thinking might give me a little more down low. I have heard of guys doing it on 2004 FE550 header pipes on 2004 Fe450 and getting some good results. Any ideas etc??

Hi everybody, I'm just wondering if anyone has a good solution regarding leaky exhausts. The problem is where the dual exhausts enter the manifold. This has been corrected on later models with twinwalled connections. I haven't come up with something that can both seal and move. Maybe someone...

Can anyone tell me where to download/get a manual for the WP bits on my '99 FE400.

After Nearly 4 Sundays Of Trying To Start My Bike I've Just About Had Enough Of It :evil: :evil: :evil: Cleaned Out All The Gunk From The Carb,New Air Filter And Adjusted The Valves. No Joy In Starting. New Udated Battery And Cleaning Of Stator,Nothing. Struggles To Turn Over On The Button...

Gearings For 01 FE400's,My One Doesnt Like To Go That Slow,Seems To Stall Very Easy. My Sons VOR Will Tractor Nice And Slowly,Almost Walking Pace With Out Stalling. The Berg Wants To Go At A Running Pace,Which Is A Little Fast For The Type Of Riding We Do. What Would You Guys Recommend...

Hey Guys, I have been looking at buying a 1996 Husaberg FE400 from a friend that purchased it new. The bike has only eight hours an has not been ridden in about 6-7 years. It has been stored in a garage on a stand. Are there any glitches or problem areas with this year and model? Do...

I am concerned. A few weeks ago I made a post detailing my sudden loss of power on the trail and a clicking/ticking sound emanating from within the engine. At that time Dale suggested cam followers as a potential problem. Sounding like a good explanation, but I investigated and found the...

Hello all, Tried a search and couldn't find the earlier tread I seem to remember. What are the aftermarket options for front and rear wheel bearings for a 03 FE400? Will the Enduro Engineering kit for the KTM 400/450 work? Thanks David

Anybody have the info? I only have access to the 1999 manual and as far as I can see the 1999 comes with a different carb than the 1997.

Bought an 03 FE400 in May 04. Love it...but yesterday I blew up on the trail. Lost power, loud clicking from the engine. Did I drop a valve? It starts, but I am worried about damage. About 25 hours on the engine. There are no Berg dealers in my state, and I do not consider myself...