engine

2009 Husaberg FE 570 being repaired currently. Engine locked and has fuel tank issue

Hi guys, im new to this forum but very happy to have found a place for the Berg enthousiasts! I've always wanted to get a proper supermoto after driving mopeds and other types of motorcycles and now recently a nice 570 (I think FE converted to supermoto) has come on my path via a friend. It's a...

94 FE 350 I need the rubber intake boot. Where the carb connects to the engine. Any help directing me where to look would be greatly appreciated. Thanks in advance.

Hello. I just got my first husa like a month ago. It was running fine, expect little noise at the idle rpm. Didnt wonder about it too much. Then the bike got engine stuck while driving with full throttle. Got it home and opened the clutch side. The timing chain was loose. Got the chain...

Hello Bergists. I have for sale my 04 FS650e, registered on my name.Everything new in the engine, i mean literally even the smallest o rings etc.Crank restored and rebalanced without the counterweight perfectly by mr. Joel Asbach. Aside the engine also new is: Silicone blue radiator hoses...

Hi I have a problem with My husaberg fe450 2010. When they motor is hot it have problems to start . O clean inyector change filters they pump run and give 3,5bar of pressure, check de wire...... Some idea? Thanks sorry for my Bad English

Hello gang. I'am looking for 600 cylinder 600 crankshaft and rod (92-98) or 501 crankshaft and rod (98-00) DM me what you got with pictures thx for advance

Dear members, I'm having trouble with my 2010 Husaberg FE450. I've got the bike for a couple of months now but I'm facing some problems I can't solve... It all started after I washed the bike. The bike started to stall and I've had difficulties to start it again. After I dried the air...

Evening all Got a 2001 550 in to rebuild after a bearing failure, just in the process of getting a parts list together If anybody can help with the following it would be greatly appreciated Mainly relating to interchangeability between the 01-03 Bergs and the 04-08 KTM Bergs cylinder...

I realized that my bike does not have the serial number on the engine ... Should I deduce that among the previous owners there is some cunning?

Hi, I am selling an engine for husaberg fe 501 400 with estart, priv

Looking to buy engine only...want to swap my 450 for 570 using in snowbike.

Hi I have a Husaberg FE470 year 2001, my engine was knocking so I took it apart and I found the bearing in the rod/crank assembly is bad. I have been calling places that sell Husaberg parts and nobody have parts for this bike, anybody knows where can I buy parts for my engine? Thank you

I found a motor but it's a older one, it has a screw on oil filter cover so it might be 90-96 ? does any one know. I have a 97 with a oil pump and this one does not, will the crank shaft work in my motor ? Brian

Hi Guys, This 03 FE400 is for sale through a local mechanic/friend, decent price, and is in amazing shape. I'm highly interested but not used to the "Semi-normal" noises of these exotic engines. The horrendous noise is only really at idle, but happens whether warm or cold. Any opinions? I'm...

Looking for a set

I could use some help working to get my beloved 08 Husaberg FE 550e back on the road. So what went down today was, I was riding down the road and I noticed my engine seemed to be bogging down, shortly thereafter it died. As I tried to restart the bike I could hear a nasty banging sound. It...

Dear community :) I finished the assembly of the engine. I replaced every parts of the carb. Identical to origin except main jet which was not available at 185 but 190. I have check the clearance of the valve to 1/6 turn méthods. The ignition plate set up is controlled as described in the...

Hi All, I know that Husabergs have a voice of their own with the whining, however I have just bought a 2002 FE650 and it is slightly tappy. I have adjusted the valve clearances and seems to be a bit better. My main question is, this bike has mixed mileage on the MOT which leaves me...

Hello Gents, looking for some insight into the mounting of my 600 engine. My swing arm pivot bolt is to large and there is some kind of brass fitting in the mounting hole. Is this fitting removable or interchangeable for another size ? Sorry can’t figure out how to upload my pics. Here is...