end

Can any body tell me how much end float there should be on the output gear shaft 550 04. Sparks.

Friend is rebuilding his 2000 FC501, mostly on the top end where it needs attention. He's replaced the cam, cam bearings, and will be replacing the cam chain....and was asking if it was necessary or even worth while to replace the mechanical cam tensioner?? He said while he's in there he...

Hi All, I have wanted to float this question for some months now, but have never had time, started 2 weeks leave today, so here goes... I have this sensation with my '05 FE 550, when turning in both sandy and loose gravelly conditions, the front end feels as if it is 'bulldozing' when in a...

now that i have your attention do any of you think a 96 rear wheel will fit a 98?

We have developed the new billett alloy exhaust end cap that adapts to HUSABERG 04,05,06,07 standard muffler we claim about 2 horsepower over the standard combination with a massive improvement from zero to mid range, it includes a small arrestor which can be removed . If you live in Australia...

Anyone in Husaland have experience with modifying the stock Rear End Silencer from a USA 2002 FE501E? I would like to get a bit more flow from what otherwise would appear to be a stock silencer to the US Forest Service. The silencer is one of the "long" Arrow-type units and the parts catalog...

I am in the process of rebuilding a KTM560 SMR that lost it's crank bearings after 6 hours.(brand new) I see that KTM and Husaberg both specify to only shim for proper clearance on the ignition side. Is there a reason to only shim that side? The reason I ask is when my crank was removed...

hi there all. just wondering if any of you fellas has replaced a big end bearing without replacing the conrod. i have had the motor pulled down about 4 months ago.the big end bearing felt like it had no up and down play in it so i,m thinking there couldn,t be much wear in the conrod or pin...

Hi guys, I was just wondering if any of you knew the price of the FC muffle end cap that would fit a 05 650. As I am looking to convert my FS650e pipe into a straight through FC pipe for a bit more flow. I can get the end cap in Aus, but its Aus$100. If its like US$20, it would be worth...

Gidday all, Just wondering if anyone has come accross a Generic aftermarket part by 'Pro-moto' or 'pro-bike', or something of that approximate name, the product is an exhaust silencer end cap, to fit Berg and KTM silencer cans. the product has a significantly wider appature than the FE /...

I've lost one of the two bolts (#15 on page 24 of 01 parts manual) used to adjust the rocker arm play. It came from the fact that the thread was gone, I guess, because the bolt would turn endlessly (swear it's not from me overtorquing, this time). How bad is the fact that I cannot adjust the...

320 km weekend trip. my 1999 fe400 still going strong http://rides.webshots.com/album/553789406aRrkMx boy do i love iceland

I am getting real close to pulling the trigger on an 07 FE450 that will become a 380 instantly. I dont really think I will ever put it back to a 450. Is there any market for selling the 450 top end? All I am trying to do is to recoup some of the costs that the 380 kit will entail...

I was just concidering a bike event that consists of fairly open terrain and requires top end speed, I have an 04 fe550 ,I run a 16-48 gearing which will give me a top end of approx...

The bike: 2003 501 The rider: 33 year old male 220 lbs (yes I'm fat) with maybe a novice to intermediate ability The problem: It feels like my front springs are too soft. When I ride trail whoops the front tire and suspension suck up a lot more than the rear. This makes the back end...

After sucessfully getting the coolant into something other than my garage floor ( thanks for the tip -joe usa - "coolant hose from the botttom of the rad instead of the jug) "duh". i have found the source of the massive clicking noise , http://i51.photobucket.com/albums/f380/ ... ker001.jpg...

hi guys firstly i'd like to say how much this site has helped me understand these temperamental beasts since buying my first one on an impulse! i have a noise in the top end of my 1990 fc501, i have adjusted the valve clearances to the prescribed tolerances but there seems to be a lot of...

For the first time in 7 years, I woke up New Year's day as a non-Husaberg owner 8O I sold my trusty 470 to Pete (mrk3cobra). I have thoroughly enjoyed my two bergs. They are unique and great machines. The best part of the ownership experience is the community that is found here in this...

:shock: Ihave purchased a used fe501e - 2000 . i frequent this form often . i noticed some chat on the cam bearings . my question is this . is there any way to tell if the previous owner has upgraded the top end bearings . the motor runs strong and i check the valves often , they are rarely out...

Hi all, I have been having a blast riding my 02 FX470 that was rebuilt this last winter. I have only one issue. After a high speed crash, the bike has picked up a push in the corners, and a little unstable at times. After looking through the owners docs( very nice Taffy) I read where the 02s...