cylinder

Well the other day I spent the afternoon installing the new core exp rekluse and the new slave cylinder from rekluse. The exp was simple to install, since I needed an oil change anyway I didn't have to tip the bike, it went in just like any other clutch I just read the directions and went along...

Just reassembled my engine. It runs fine now, but the valve rockers don't seem to be getting as much oil as they used to. I didn't check the head gasket when I put the head back on. Is it possible to get it on backwards without knowing? From the outside, the gasket appears to follow the head's...

How do I remove the piston from the clutch master cylinder? There is a piston repair kit (50302032100) I can buy but I can't figure out out to remove the old one? There is no circlip. Help?

Anyone know what size o-ring I need to rebuild my clutch slave cylinder? The parts book only has it with the piston for $42. I'm sure all I need is a couple dollar o-ring. Thanks, Mike

I have an 09 FE 570 with a Rekluse Pro clutch installed. I am still using the stock clutch setup. I notice lever feel going away on occasion. Removed master cylinder cover to find reservoir low on fluid. No sing of external leakage. This has happen multiple times. Where is the fluid going? Help

Hi All, New here, tried the search function didnt really find what i was looking for. Just bought a fe550e '05, just wondering what good compression should be? I think i'm a little low, added a bit of oil and compression didnt change much, not sure if it is good compression or the top end...

Can or is a sleeve aval for early 600's? and or anybody have one they want to get rid of? I had an intake valve com apart ant cracked the cylinder.

Managed to break both clutch and front brake master cylinders last Sunday. Have sourced a replacement for the clutch (9.5mm bore) but struggling with the front brake. Anyone know which late model KTM's have a m/cylinder with a 12mm bore? I''ve been offered a couple but the vendors have no idea...

Wondering if the modified head from 2008 KTM 300 will fit the TE 300? Part numbers look the same, but the blurb reckons the '12 300 got a new cylinder which makes me wonder if cooling ports or somethinh else is different.

Hi, I am not sure this is the best place for this post, but I am looking for a new cylinder head (could be used if works) for a 650fe 2004...mine just cracks the cylinder head gasket ending on cooler fluid spraying everywhere! that's the fourst time that it happens and we tried to realign the...

I broke the front brake resevoir mounting bracket. I think the vibration from high rpm at the track caused it to metal fatigue. Anyone else have this issue? I was thinking about putting o-rings above and below the mount to dampen it. It's on a '05 FS650.

My clutch master cylinder seems to be leaking near the lever adjustment on my '09 570. Is this a common problem that is easy to fix? Is it something I can disassemble and clean or do I have to buy a new master cylinder?

Hi! Is this normal? ( is it supposed to be like that) : There were allso pretty much stuff on the oilplug magnet but transmission gears looked fine.

My bike needs a new cylinder head and I am in search for a cylinder head, I would prefer info on where I can get new, but will consider good condition used ones. My bike is a 2000 FC501. Any suggestions are always welcome

Hi my motorcycle is husaberg fe 400e ('2003) I am researching cylinder, used or new it does not matter for me. I can found piston and joint set however ? couldnt find cylinder if any body have please contact with me.thank you..

Hi my motorcycle is husaberg fe 400e ('2003) I am researching cylinder, used or new it does not matter for me. I can found piston and joint set however ? couldnt find cylinder if any body have please contact with me.thank you..

Hello people! The cylinder head has got a couple of seasons track record with very good results (winner of the Nordic Supermono Cup 2009) with high power and outstanding reliability. However, if I would have done it today, there are still some things I would change for even better performance...

Hello, I bought my '08 FE 650 out in Boise and took the long way home back to Chicago. Instead of 1600 miles or so I did 2600+ to take advantage of the opportunity of experiencing the roads. Great choice. Wow! If been riding this incredible beast everyday since. Yeah, I've heard all the...

Good day gents...and ladies, I just had the almighty exhaust valve spring brake on me. I replaced them all with a set from Taffy and the installation went just fine. However, when putting the whole thing back together, I noticed that the piston gets stuck at TDC while trying to kick it over. it...

Hi folks Does anyone make an anodised cover to fit the Brembo front brake master cyclinder on a 650 FS? I noticed you can buy one for the FE but this has different fittings....