cylinder

I'm looking for a rebuild kit for my clutch master cylinder, 2002 501E. I can't find parts for this bike anywhere. Everyone has parts from 2004 on but not before. This seems like it should be an easy item to find, maybe there's a KTM part that will fit? If anyone has any ideas where to find...

I'm looking for a rebuild kit for my clutch master cylinder. I can't find parts for this bike anywhere. Everyone has parts from 2004 on but not before. This seems like it should be an easy item to find, maybe there's a KTM part that will fit? If anyone has any ideas where to find this part...

Hi guys. Any of you has experience with Oberon clutch slave cylinder. I wondering if it will fit my 2011 FE570 . Thank you for any respond cheers Pixelman KTM

My bike is FE450 2005 at 200hours. I have some pictures about cylinder and need some suggestions about replace or not. There are some stretches in cylinder but i feel a bit deep at only one stretch. Can i use the bike at this situation? Thanks.

I've just been lucky enough to go to the MotoGP at LeMans and apart from anything else the sound of the bikes is amazing...........but nothing compared to this little french beauty. https://www.facebook.com/471184016269118/videos/820041808050002/

Got the 1198 (106mm) cylinder here now.

I am chasing a crank a cylinder for a fe570,If anyone knows of any around please email me on [email protected] I am in Sydney Australia Regards,Geofie

Hi guys, I've recently had to replace my hydraulic clutch pipe and was now in the process of filling the clutch system again with hydraulic fluid. As soon as I fill it up from the bottom, all the fluid in the master cylinder disappears and enters the engine. I had to open the oil drain plug...

Hi! I have a husaberg fe550 -04 and I have a crack in the cylinder liner so I'm going to replace it and the piston.. But since I'm going to disassemble the engine, I was wondering what other parts u customarly replace when doing this type of job? Barrings and so on? I have one other question as...

I have had the berg for a year. Love it, but it came with a slight drip that manifested itself on the bolt of the clutch leaver. Traced it to the master cylinder where the plunger/piston enters. Replaced the plunger after cleaning all parts. To the eye, the bore looked good on the MC...

I am freshening the head and rockers on my 05. In addition to lots of scrubbing with Simple Green and a red Scotch-Brite pad, a bronze wire brush on a drill really restored the exterior. It looks similar (to me) to a vapor blasted part at a fraction of the price. A $5.00 stemmed bronze wire...

What is the best way to remove alignment dowels from a cylinder so that they can be reused?

does anyone know a fair priced firm (UK) that will re nikasil plate my 2003 501cc cylinder and supply a piston ? if so what sorta cost ?

Sorry, found it.

hi everyone, I'm new here and hope anyone can help me. I'm desperate to find a connecting rod for my 2000 husaberg fe 400.where can I find one? other question, I also need to coat the cylinder sleeve, should I do that or is easier/cheaper to buy one? thanks for your answers, Rui Santos.

I'm looking for a clutch master cylinder assembly that's compatible with my 650, supermono project, ebay search draws a blank, are the KTMs compatible with the Husaberg clutch line? 250? 450? LC4? Many thanks.

Putting the clutch back together on my '04 FE450, and the pushrod didn't seem to want to sit flush. If i pushed it hard enough it would go in, and the master cylinder would gargle! So I removed the slave cylinder, and the piston popped out, with a small spring inserted into the back of it. I've...

Brand new to a 2005 FE550E. Bought it Friday, went riding and a stick jammed itself between the front sproket and slave cylinder and cracked it. Contacted Sutto's to order it a they said approx 4 weeks for delivery. Is there another option or uprgrade or ????? Thanks

I have installed the new Rekluse Core EXP 2.0 with the slave cylinder, but how can I adjust the Rekluse with the slave cylinder when the case guard is hiding the hex hole on the slave cylinder. (Husaberg FE 450 2009) In the manual they say that for Husaberg 390/450/570 FE/FX 09-12, Husqvarna...

While replacing all the brake pads and fluid on my 2005 FE450 a few days ago I discovered that the rear brake cylinder does not line up very good with the rear brake pedal pressure rod / plunger. The rear brake pedal would hang up and click the first few millimeters of downward movement. I...