cylinder

Hi All, I'm wondering if any of you might know of a aftermarket Front Master Cylinder rebuild kit for a 1996 FE600? Any help is appreciated. Thanks!

i have a 1997 fe501e with a head gasket leak. I found water in the oil and changed the head gasket and now have antifreeze coming out of the head gasket. How do I check to see if the head cylinder is flat and if it's not flat what should i do to fix the leak?

Hello, Wanting to buy a good 05-08 650 cylinder head to hot rod. Please email me at [email protected] if you have one or know of one. Thank you, Jason

Swedish made.As old Husabergs do. I bought it second hand from a Suzuki B-King owner,it didn't match with the rest brake system of his bike. You can adjust power level and grip reach while driving,no tools needed. ISR finally meets Berg,her family. Part number 21-012-OA(Right Hand)...

Hi guys, i am looking for a quick reply, cause I am stuck with no clutch and I need the bike urgently... :( On my fs 570 2011, I ended up with no pressure in the clutch lever, no leak on the MC, but he was empty..so after reading many threads here i concluded it was usual issue with the slave...

My rear brake master cylinder seems to be missing the little clear cover that is supposed to be over the fluid. The rear brake is still working, so I am confused as to how it is working and what damage could be caused. What do you think I need to do, and can I source one of these cover/caps...

Need a cylinder head and jug as mine dropped a valve. If anyone has these parts please IM me!!

Hello guys, So i have a fs650 '04 with a broken valvecover. Got 2 550 and 1 450 covers and partnumbers match. But the right side has a 4 digit number stampt on head and cover. They match as a set. But my question is are they interchangeble (do i say this right?) and why do they match in...

Used Head, Cylinder and piston off a 2010 Husaberg FE450. Very light use on head and cylinder. Under 50 hours of run time. Long story short the motor was built for racing and had a new cylinder and head installed at 50 hours. You are viewing the stock cyclinder and head. One small mark on the...

Got a small crack to repair on outside of the head, water jacket area. There's nothing special about the head material? Mig? Tig? Many thanks:unsure:

-

Hi, After a friend wrecked his 570 engine (http://husaberg.org/lounge/21783-friday-quiz.html#post170404) we are looking for solutions. We got a nice offer from Taffy but sadly my friend is on a tight budget right now. So our solution right now is that I will rebuild his engine using a set of...

Anyone know where I can get a rebuild kit for my rear master cylinder or part #. Its a Brembo and it says 8444 on it?

Hey all, My 07' is not exactly stock;). Is there anyway I can tell the front master cylinder diameter from the outside, without measuring the bore? Thanks!

Cylinder Head with valves and springs working perfectly when it was mounted. And Rocker Cover with rocker arms and bearings in good shape. Cylinder Head with valves and springs----->80 € Rocker Cover with rocker arms-------> 40 € Everything ------->100 € All of this parts are...

Hello all, Last week I found myself without any clutch. It seems that the master cylinder was leaking, so a rebuild kit solved that problem. But the problem wasn't over, so I brought the bike over to the dealership. They installed a new slave cylinder and the clutch was working correctly...

Hi to all, After oil & antifreeze change, I rode bike for 20 mins and it shut down, rear wheel locked. When trying to kickstart it, kickstarter was not hard (low compression). Managed to start it, white smoke was coming from exhaust. When engine is opened, piston and cylinder where damaged...

Bought an 06 650 at the start of the season and had it stripped to check it out, all was good so fitted new mains and rings as a precaution. First time out boiled the engine due to leaving the track and overheated it trying to get back on track!:( About 120°c!, I should of knocked the motor off...

Hi there, I have a question regarding the clutch MC on my 570, I couldn't get the answer on the forum (all posts I found were about the slave leakage and O ring issues) I am willing to replace the clutch MC in order to have lighter pull, and to match the nice look of my rcs brake MC. I was...

Hi all, I finally have all my new engine parts in front of me and as I was taking my new cylinder liner out of the packaging for the first time (I've had it for months now) I noticed that it is marked "3". Does this refer to the sizing? I only see reference to size 1 and 2 in the manual...