cover

Greetings all, I had considered attaching this onto Buzzards leak jet thread http://www.husaberg.org/index.php?name= ... pic&t=6754 , but, thought it would be better for clarities' sake to make it it's own separate thread. Brief history, I had modified my float bowl to accept leak jets...

Hello bergers around the world , I wonder if aftermarket accelarator pump cover for FCR can improve performance of engine and works nice generally.I tried to fit one of them but when I install it in my 07 FS650e doesnt work.The engine increases RPM difficult and doesnt work properly.I...

I have installed a head and cam from a 2001 501 on my 1994 501 everything went well except I think I have the timing off, so i removed the 3 screws and removed the engine cover to access the stator and there are no holes in the stator cover,to view the timing marks. I removed the nut on the...

Hello, I need a good quality second hand clutch/transmission cover for my 04 fe 450. I've been given some leads from ss racing but I thought I'd put it on here too. I'm not going to go into things too much, but to cut a long story short after my engine was totally mangled by some f***wits, it...

i have some mechanical backround, and have rebuilt auto engines before, but i've heard that the 'bergs are very different animals and require alot of care when rebuilding. the bike sat for a year or so prior to me getting it, and the gaskets for the valve cover and the cases are weeping oil...

I whipped off the left crankcase cover of my '02 FX650e, to see if the starter gears were still there and damaged the gasket. The shop tells me a new gasket is 3 weeks away!. so is it possible to use a good sealant instead, leaving the gasket out altogether?

I got a new really cool looking seat cover from Dan at Motoxotica and tried to attach it today. Depite the fact that I have a powered staple gun and heavy duty staples, the staples would consistently fold over and not penetrate the seat base. In desperation I finally got out my heat gun and I...

we are in need of a partfor a customer.it is the large clutch cover for a 2004 or newer husaberg.new or used,just need the part.part # is 800.30001.044.thanx,dan

Wondering if it even needs to be welded or if i can leave it go I thought maybe it could be left. Any ideas by the gurus on here that would know for sure if i can or cant would be greatly appreciated... :)

Has anybody stripped the paint from his clutch cover and then repainted it? I am not looking for the good old B word, there are just plenty of scrapes on this cover and I thought that a little touch up could not harm anybody. What type of paint would you recommend? Heck, I have even...

Just got back from a bit of mud plugging and have an oil leak from the left hand side of my rocker cover.On removal of this there seems to be an absence of any form of gasket !!!.Is this the norm and if so what now ?????Oh yes I have a03 FE400E....ANYONE

Hi, I have a 2002 FS650e which has a broken Magura clutch reservoir cover. It has the bracket for the manual decomp lever and that's the part that has broken off. I'm in Cambridgeshire UK, does anyone have a second hand one available that I could buy?

Hi there guys, I have a friend. Let's call him Justin. Justin has an '01 470 FXe. Recently, Justin stripped the head of the allen bolt (lower) on the oil filter cap. Justin purchased new bolts. After running it around a bit and allowing it to warm up, he took his brand new allen...

Can any give me some insight as to what I'm going to encounter when I remove the transmission cover to install a new gasket. Do I need to drain the radiator or do anything else before I remove this cover. Also while I have the cover off, what types of things should I inspect while I'm in there??

As I was putting my 99 fe 400 together last summer i noticed chain grooves on the inside of the rocker arm cover. i don't know for sure, but am assuming the engine was tore apart due to a major timing chain failure, although doesn't explain splitting the case. new timing chain and gears and...

HI On a FS650e Can a 2004/05/06 clutch cover be fitted to a 2003 engine? Thanks B

Hi all, My fe 501 has suddenly developed a rather loud ratchetting noise from behind the clutch cover. All was good, out riding and having a ball. Stalled the bike and upon restart (kick) the noise was there.I have removed the clutch cover everything looks good re fit cover noise...

Hello everyone. My '05 450fe has oil leaking out of the oilfilter cover. Could I have damaged a O-ring when putting it back or is there something else I did incorectly that I'm not aware of? Has anyone else had this happen to them?

I've got a persistent oil leak from the rocker arm cover/cylinder head joint on my '02 fe400, it looks to be at the left front corner, the side with the 'o'ring seals for the cam blanking cap. I know this is a metal to metal joint, but I tried using a thin loctite bearing sealer liquid to stop...

A nice shot of an airborne 'berg on the cover this months Blue Ribbon Coalition magazine along with an article inside. If you're not a member of this group, you should be.