chain

I believe my 2006 Husaberg fe550e is about due for a new cam chain. I checked the ratcheting adjuster, and it's almost all the way out. I have a new chain in my cart at Taffey's (100788 - R80036013000 R80036013100 IWIS Cam Chain with split link- 66 Link - 501; 2004 & 550 models 2004-2008)...

Hi, Does anybody know how many chain links a chain must have for a Husaberg Fe650 2002? I need to order a new chain. Mine is missing a few links i think. (bought the bike as a project) Kind regards

Hi all, Can someone send me in the direction of where I can purchase a chain guard for my 2004 450. I Australia we need one as a safety precaution to pass registration. Any condition really. New, used etc. even just a website I can purchase it from. Thanks in advance Brenden

So.. long time follower and reader.:o Engine Nr: 1054383 / 220067 1999-2003 Bike: YU7FC5K94Y0000165 I am changing piston on a 00 mod Husaberg 501. Timing chain was new when I bought it, so was planning on reuse it for season. This is the engine type where you don't have to split the engine to...

I am getting my bike all back together after getting most of my parts from taffmeisters. While following the install instructions for the cam chain I am having a lot of trouble with the chain being a mm or two too short when trying to get the quick link on... I'm using the chain that Taffy sells...

Hi guys I'm working on a hybrid ktm rfs where the deck height isn't matching up enough to keep the timing chain tight. I was told the berg parts will fit and are a different pitch 10mm instead of 8mm on the ktm. If true it would give me the extra length I need on the chain. The parts fiche...

Hi, I have FE450 2011 300+ hours on engine and my timing chain is rattling like this i guess. I want to ask. If I will change timing chain for a new one, is it ok? Or I will need to change timing chain and timing chain tensioner? I dont like manual cam chain tensioner. Dirt trics cant...

I need a swing arm chain protector for my 2002 Husaberg. The part number is 120 052-03. If you are aware of anything close I am happy to make mods to get it to fit.

I need a swing arm chain protector for my 2002 Husaberg. The part number is 120 052-03. If you are aware of anything close I am happy to make mods to get it to fit. Thanks!

Hi , I'm looking for a timing chain riveting tool not too expensive . Any suggestions ? Thank's

I might be missing something but I cannot work out how to check the chain tension according to the manual.....it seems a little foggy to me - can someone interpret for me? I've checked other chains from the middle under the swing arm, or from the top of the swing arm - but never as described in...

Hey folks! After removing the exhaust to change the bearing, seals and o-rings in the clutch cover/H20 pump i noticed the top end gasket was sweaty/wet so i thought id change that as well before it starts to leak.. So I need to break the timing chain and rivet it back together to get the head...

Hi All, Have a FE550 and want to replace the drive chain. I have a 16 front 40 rear, not sure if thats the right setup. Looks like i have a 112 chain length.? Can someone out there give me a clue? Thanks

Can someone make a recommendation for a chain roller replacement (part number 120 056-01) for my 2002 Husaberg FE650e. I checked with the local KTM dealer and he could not find the part number or my bike. I found plenty online but without measurements I cannot make sure it will fit. Seems...

Had this FE450 for a month or so with 220 hours on it, and on startup, there is camchain slap that takes a minute or so to clear whilst the auto hydraulic adjuster pumps up. I'm told a manual adjuster is the way to go? If so, where can I get one?

Hi again folks. I also have machined some mechanical timing chain tensioners. If you are interested. https://www.motoren-israel.com/Husaberg/Eigene-Produkte/Mechanischer-Steuerkettenspanner::202040.html Thank you for your interest. Greetings from Germany

i just got a 2001 FE650, it has a broken timing chain and a bad tensioner i think. i need a source for the chain and tensioner. where can i find an ( 06B ?? ) chain of good quality. 70 links?? i may need a new lower sprocket as well. thanks for the help!!!!

Hi all, I have read through few posts but not found what I'm after.. I have a 01 650 engine, full rebuild is in the finishing stages. I have a Ali cam sprocket in good condition. New iwis chain, new modified 04-08 cct blade, and original cct. When I install my blade, then install my...

Hi, I have a 2001 fe650. Looking for new chain/axle adjuster blocks as my old ones are modified ktm ones and they look tatty and orange. Seeing as they are no longer available, what do people use instead? I'm after anodised blue or black ones. Will any ktm, husqvana parts fit? I know I...

Berg fe 350, what is the stock chain size and. Length? O-ring? Ty