carb

Hey was having trouble getting my bike to start as it has been sitting for 2 years. Was gonna pull the carb to get it cleaned but looks like the engine needs to come out. Is there an easier way to get that thing out.

I have bought myself a non running 2002 Husaberg FS650 I want to get running. Since it has been sitting for approx. 6 years I thought that I would clean the carb as one of the things. (It has a spark when kicking) I have taken the carb out of the bike and it is a Dellorto PHM 40 ZS...

is it possible too use a keihin 3900a-drl on a husaberg fe650

i have a 2001 fe650 whit 40mm delorto it floods all the time, i took it apart and cleand it, adjusted the float hight and it was fine, but it was wery rich running, so i adjusted the needle 1click down, now its flooding again, and i dont open it, just loosened it up, and twisted it aside...

Hi guys I recently purchased a 2002 fe 501 not running, stator open cct. I ordered the only stator I could find in stock in Australia on ebay as I didn't want to wait for one from over seas given the current covid situation. I fitted the stator and had a spark so that was thrilling, I...

jetting a bike is a relentless task, usually done with no guidance or help. owners stop the moment that they feel thay have them running "OK". I met this American that actually wanted to test and give honest feedback. probably only the 20th person in the 580 kits we've sold. I liked him that...

I had this carb on the bike but it was to long in the front and smashed the boot for the air cleaner. So I put it in the lathe and cut about 8mm off the front and cut a groove in it to match the boot on the engine. It worked out great.

Hello, Has anyone on here every replaced the Delo with a Mikuni? I have a BTS 33SS that I would like to try on the old 350. Just wondering if anyone had done this? Thanks, fedge

Hello all, I am a relative noob to dirt bikes. I purchased a 2004 FE550 last August. I have done a few things to it but nothing drastic. 2 weeks ago I went to Death Valley with friends. We rode a couple days and on the final day I started having trouble with my bike cutting out in first...

Hi Folks, So I recently redid all fuel lines on my 08' FE 450 & have no leaks minus the brass fitting that swivels attached to the carb itself. There must be an o ring that needs to be replaced & Im seeing that theres no retainer on the outside. This tells me it'll likely be a c clip or whatnot...

Hi folks, I've got a 2008 FE550 that is running well but could be better. I had quite a loud top end rattle so I checked cam chain tensioner, it has about half way left to go. I checked and adjusted valve clearances to 1/6th turn. The intakes were perfect but the exhausts were way loose, I...

How to take carb out of fe550

Hi all. I'm trying to reset my motorcycle. fe 400 98. now it has a carburetor dellorto phm 40 I would like to see it on my bike or not. And help with its connection where what hoses connect. In advance excuse for English I from Russia and peshu through a translator.

Hey up! Just to let you all know that I'm in the slow long slog of tuning the standard 40mm carb on the 650 2002 model I have here. as many of you will have seen on my Facebook page, we had the NTB650 starting with virtually no choke. if this can be cured it will but it will come...

Hi all Been looking round at the FCR 41 carbs. There seems to be a fair few around but looking £400 for one. Are all fcr 41's the same? Some seem to have a wire/cable? That's the TPS I believe? There's one I've seen for around £300 but looks old and in need of a refurb. I figured if I'm...

I am having a load of the centre rings made for this carb that will allow 44mm. basically, you can bore the start and finish of the carb to 44mm but the centre 'ring' won't take it. so I have designed this ring from scratch and I'm having them made. they should be at the Telford Show on...

Has anybody installed the full akra system an a FE600. If yes, did you have to chance the carb settings? If yes, what is your setting?

Hello all. I picked up a '91 husaberg off of someone that needs some love to run again. The previous owner told me he cleaned the carb but I can't get the bike the bike to start. Being that it kicks over, I'm thinking either spark or carb settings. Does anyone have any favorite baseline...

Good evening all, Carrying on my rebuild of the FE350, I have the bike running now, albeit on choke only. (click to enlarge) I am not sure what the brass part I have circled is for. I know it is for a rubber pipe but I am not sure what the pipe connects to. Any help would be great. Also...

Hi guys my name is Ray I'm from Australia and I recently took ownership of an 04 FE650 with just 51 hours and 2600kms on it. It did however have a flat spot down low in the revs. After inspecting the carb I found that the accelerator pump nozzle was blocked, after many hours of trying I could...