cam

Anyone come across a cam marked WW-HC 1G number 15. Was told it was fitted in a KTM but was far too 'hairy'! Searched Hotcams website and googled it but nothing comes up!:unsure:

Having 170 hours on my CFB's I figured I'd better have a look at them. I'm just taking a break to share, I'll post pics later. Have got to get it back together for a dirty ride in the morning. Same part as I've done before: 59036061090 bearing complete circa $26 ea. Only had a little...

ok guys ... experience with split links and rivet links ... who has used what and how was reliability ... then next question ... is where to purchase in uk ?

Has anyone installed on of these? Red Manual Cam Chain Tensioner 2001 2008 Husaberg FE650 FE650E FE 650 650E | eBay Any thoughts?

Just changed my cam chain. Three hours running. Went to a local enduro today. 3km in to the first timed section, the bike quit. Damage, one broken cam chain, two bent exhaust valves and the tensioner bolt got bent and cracked the head where the bolt goes through. The cam chain broke but not on...

hello I'm about to have a job lot of race cams done and if you'd like to have yours done then please forward it to me and I'll get an even better price I hope! I'm going for the LX1 profile which has 10.4mm inletr opening, bit less on the exhaust and 284d of duration. this profile...

I should probably be beaten with a stick to admit that I bought this bike 5 years ago and haven't decided to fix it till now. When I got it, it had a really bad clacking going on in the head, the owner was well aware of the possible "grenade" he had. To my advantage I got it for an absolute...

Hello dear I have noisy cam follower bearing on exhaust rocker arm, intake is fine. Bike is fe 501 2003. Just call dealer near me and he told be that they are not available any more. Do you know any replacement or other solution? Are rockers from 2004+ compatible ? Thans in advance

Hi all Looking at changing the cam chain tensioner in my 2010 berg fe450. Any advice would be appreciated on either a Dirt Tricks or DJH. Which is best and how easy to install? Cheers Jon

I have purchased a 07 KTM RFS cam, decomp, bearings, water pump seals and cam sprocket to use in my 97 600 Fx. The cam measures out the same except where the cam sprocket bolts to the cam. Its a few mm's further away from one of the lobes. I am still using the aluminum cam sprocket which...

2007 fe550e piston inspection - tools needed I'm about to check the piston in my 2007 fe550e that has not been worked on since new. I want to get all the tools and parts before starting work. 1. Looking through the workshop manual one thing I am unsure of is whether I need to buy a new...

My 08 fe 550 has been making nois and progressively into a knock when I went to tighten the cam chain tensioner, i saw it was at the end of its adjustment. So a mechanic buddy of mine suggested welding a small block at the end of the tensioner to extend its reach. the knock continues. took...

I have question. What tools do you use to rivet IWIS cam chain? Husaberg OEM tool? Maybe KTM tool also works?

Sold Sold

I'm looking for a spare cam sprocket for my 650.part number 80036011100. can anyone tell me if there is a ktm cam sprocket the same.as I know that some ktm cams work great in these motors with water pump shaft cut off. cheers peter

OK, so if you’ve been following the thread below you’ll know that after a small crash at local mx track on my trusty FE 501 02, the shift rail & shift quadrant plates got jammed (don’t think it was as a result of the crash directly)...

Hi, I've just put together a 2004 FS650E with a new camshaft, it's bearings and a set of KTM double spring set after one of the conical inlet springs broke... I also put in a new DID chain and I realise after 2 hours only that the tensioner is all the way out already! Anyone having any...

Yep blew it up. 9 months ago. Waited for cp to make me a piston over the Christmas break, work etc has made it a long haul, but at the suggestion of a mate I had a go I went for a couloe of rides, it's lean as hell in the bottom end, havent cracked the top end yet maybe...

OK im all for getting along and if nobody is "allowed" to write 4 pages of abuse in my direction every week anymore it should not be a problem now there is a bit of a numerical anomaly that may be of interest to some people my DID cam chain weight 255gm (OEM) my IWIS can chain weight 272gm...

Brought a new cam sprocket to replace my worn aluminum one, new one is steel + looks quite different. Is this the correct part? can I fit it straight on? Cheers Mike.