bearings

Took the rocker lid off my 550 more for a nosy than anything noticed that the cam bearings didn't have the RS seals on like shown in the manual will this be any detriment to the life of the bearing or do most people remove the seals when fitting new bearings. Never come across RS bearings being...

The original bearings that are fitted to your to the range of Husaberg motorcycles are failing regularly the NJ206 bearing inner race will shed metal and put it through your engine and ruin the chrome bore and piston, KTM has the same problem on their EXC 450 -525 and use the same bearing...

im refitting the starter back on a 650 fe before i start all the internals have been removed so have replaised the brocken slipper cogg and the roller bearing.now is there any more roller bearings that will have been removed with the gears from the starter system i cant see any in the owners...

Hi Guys I have to change the main bearings of my Berg FE 600 98 model, but I have some doubts about the best option. 6206/C3 or C4?? Bearing with steel retainer or resin retainer?? Please give me kindly some advice!! Thanks a lot form Spain!! Chichor

Hi guys i have removed the counter balancer bearings (they are both the same) however i can find no numbers on them so that i can replace them from the bearing specialist. I can now only buy the 07 as a complete unit (Counter Balancer) priced at $500 AU and really would like to just replace the...

Bearing guy seemed to think so :) Can you guys confirm that they will be ok to use in my 2005 650 :P

hi there all. just wondering if any of you fellas has replaced a big end bearing without replacing the conrod. i have had the motor pulled down about 4 months ago.the big end bearing felt like it had no up and down play in it so i,m thinking there couldn,t be much wear in the conrod or pin...

Hi All Still rebuilding my 400/600 bitsaberg. Gradually the thing is coming back together. It now runs ( rather well actually), looks fairly good but I still need to get the gearbox sorted. I now think theres a problem with the steering head tho'. If i tighten the locknut with the wheel...

(1) Main bearing bore axial misalignment remains a reality albeit uncommon on new engines. (2) Main bearing bore ID is all over the place with the ignition side often tight. (3) Roller bearings when properly installed work great and in truth are not all that sensitive regarding "excessive"...

hi fellow bergers, i am in the rebuilding process for my 95 fe 600 since september due to constant travelling because of my job (production,rebuild and repair of heavy industrial machines for marmor-stone processing). i would like your help for a couple of issues here, one is for the HK...

does any one have handy the numbers of the swingarm + lingage bearings for my 1995 fe 600? i know they are the same and they are 8 at total. not the part numbers on the manual, i need the bearing number so as to order them from an skf dealer where i have 40% discount because of my job...

How do I set the tension on the steering head bearings? Thanks

I'm replacing some worn out bearings in my 501-Fe 2002 engine. This include camshaft bearings, counter balancer drive axel bearing and some gearbox bearings. When I bought the new bearings, the camshaft bearings and the bearing for the counter balancer drive shaft were double sealed but the...

Hallo! I need to change my swingarmbearings. My questions are, do you have any tips to give me before I start? In other words are there any things in particular I need to be aware of? And, do you always use bearings from Husaberg or do any of you just buy bearings from a "bearingsshop"...

Before i open the engine for replacing the cam (thanks to Taffy), i need to know the bearing code of the cam bearings, can somebody tell me that ? Bike is 02 400FE -Mika

This is from my Berg which was purchased 14 months ago brand new. I have meticulously changed the oil and airfilter all the time as well as regular valve clearance checks performed by Dealer. No warnings and this is what has happened. I have done 3000kms on it so far. I am chasing up Husaberg...

With regard to the previous main bearing thread: In a nutshell what I believe to be weak links: 1. Improper running clearance as a result of sloppy case bore tolerance. 2. Axial crankshaft bore misalignment as a result of sloppy tolerance control...

having only been riding a dirt bike for 5 years exactly i have had a lot to learn about what dirt does to a bike. i've learnt maintenance intervals and what to change and when. i've now learnt a great way to keep wheel bearings going. it's nearly two years since i had to change wheel...

Ordered from Husaberg cam bearings recently.part # 36000001 which is the cam bearing in every husaberg that we have any experience with.they have always been an open on both sides ball bearing.what i recieved this shipment was ktm part # 0625062014.a bearing of the same dimensions and grade but...

Hello,This Is My First Post And I Wonder If Anybody Can Help Me. I've Recently Bought An '01 FE400 So I Can Go For Rides With My Son On His Gasser 400. The Problem With My Bike Is The Front And Rear Wheel Bearings Are Shot,The Bike Wobbles All Over The Place. Being In The Uk Nearly All The...