bearings

Hi to all, couple of things while cleaning the Berg (Fe390) I discovered a little play in the rear wheel bearings I believe that the ALL balls / pivot works aren't the best replacements but don't want to be taken to the cleaners for KTM prices suggestions please I'm a big believer in quality...

Has anyone a list of the bearings and seals needed for the Husaberg rear linkage system? bearings pins seals shoulders and spacers? if I can help you help me etc? let me know if anyone has the dimensions or 'what else they also fit'! I have the actual swing arm bearing...

Hello! Is it ok to leave the small needle bearings in engine case when i remove the starter gears? It`s my "new" -03 450 engine and i have no experience of those modern engines ;- ) Cheers Jampe

I need to change all the bottom end bairings on my fe400 big end, little end and main crank bairings, is it possible to do this myself? I have access to a press, but not much more bike related equipment. Is balancing essential? I'm doing the bearings then selling it, I've had enough of it now...

Skate bearings generally last a long time and require little maintenance. If you ride them in the rain or through some puddles then it might be a good idea afterwards to give them a strip and regrease just to stop them rusting too fast. Many people keep an old knackered set of bearings...

Skate bearings generally last a long time and require little maintenance. If you ride them in the rain or through some puddles then it might be a good idea afterwards to give them a strip and regrease just to stop them rusting too fast. Many people keep an old knackered set of bearings...

Hi I have a husaberg supermoto and i want to replace the wheel bearings in the front wheel and rear. i heard a noise and i think that is the problem. I dont know which brand to choose. i found these (moose-all balls-pivot works) does anyone know what brand is the best? i think all balls using...

I need a new pair of balancer bearings. OEM or good quality machine bearings. I consider buying the whole balancer at a good price;) I am not interested bearings from Taffy.

Hi everybody :) My crankshaft and rod have made a mess in my engine leaving chips in my bearings. Anyone now a site to buy all the bearings to my engine without getting ruined? Ketil

Hi Got a 2007 650 Berg Need to replace the front and rear wheel bearings. Optimal would be to buy the bearings somewhat cheaper from someone other than the dealer. To do that I need some kind of identifying number for the bearings. Can anybody help me with that? Also as I am...

Hi Guys, I want to order set of japanese good quality sealed bearings for my 2011 FX450, ebay and shops are selling allballs **** and everyone knows how long they last, my rear bearings feel worn but no play there yet and I don't want to take them out and wait with stripped bike for the...

my 05 450fe started a strange rumbling sound around clutch. pulled motor down couldn't find anything at the start but found the four small needle roller bearings holding starter gears look fine but when put gear in a turn by hand it sounds like rollers in bearing are square. can anyone give...

Hi all, Rode a 550 last summer and I still can't get it out of my head, so I'm doing my homework before purchasing one :) We've had a really good summary thread on the main bearings recently: viewtopic.php?f=5&t=18085 Some local riders have warned against counterbalancer bearing failure. How...

I Might sound stupid here but are the balance bearings the ones that are in the casting were the crank goes through

Hi guys. Im trying to replace the head stock bearings but can't get the yolks off...what am i doing wrong? I slipped the forks out. Remove head nut and top yolk came off fine but lower 1 dosnt won't to drop out. Could it b seized up?any advise?

Been searching for some new wheel bearings for my SM but I can only find them listed for 04 and after. Anyone have part numbers or dimensions for the front and rear seals/bearing sets? I'm not sure if 04 is the same.

Well, my 2001 fe650 is now in the basement for winter maintenance and upgrades. I had a tough time getting the valves adjusted this summer And never did get it starting on the button. Ive found the cam follower bearings to be in bad shape. Could this have been my valve adjustment and electric...

has anybody fitted a dcr main bearing kit ? which is a ball bearing and not std roller if so how good are they

Hey guys, I need to replace the steering head bearings on my 99 501. I was wondering if anyone had a bearing number i could bring to the local bearing supply shop.

does any one know where to find balancer bearings ? also looking for some 105 mm head gaskets , does any one have some idea's ?