arm

I have a 2000 fe400 and I need a swingarm replacement I found one from a 99' will it fit?

I need a swing arm chain protector for my 2002 Husaberg. The part number is 120 052-03. If you are aware of anything close I am happy to make mods to get it to fit.

Does anyone know what bearings and seals to use for swing arm in a FE400 96 and FC600 99? I have been trying to look in older threads without success.

I need a swing arm chain protector for my 2002 Husaberg. The part number is 120 052-03. If you are aware of anything close I am happy to make mods to get it to fit. Thanks!

Hello Gents, looking for some insight into the mounting of my 600 engine. My swing arm pivot bolt is to large and there is some kind of brass fitting in the mounting hole. Is this fitting removable or interchangeable for another size ? Sorry can’t figure out how to upload my pics. Here is...

Wondering what the correct setting on the external rocker arm is supposed to be. There's some black wear on the nut underneath where it sits, suggesting that it was supposed to be touching / resting on it. At present, I've disconnected it (up at the lever end) until I figure this out. So at...

Adjusting my clearances 1/6th turn but the exhaust side rocker arms don't move or click like the intake ones do... Can't be right can it?

My rocker arm shaft had to be replaced so Im replacing it with the ones from a KTM 500 2012. The reason is that they have a machined flat line along the shaft so more oil can flow for lubrication. Same price, same dimensions but a bit better due to this. Just a small tip. The new KTM shaft...

Had a bit of machining fun yesterday along with the compulsary ********* stories and some "Lussekaka" (Swedish saffron kake, namnam). On the shelf was this swingarm that was in good nick but it was for a narrow cased KTM 450 SX -08. This is the same exact casting as the 570 but too narrow to...

Hey guys, Sent my head off to Thumper Racing for a port job. While I am in the head/rocker cover I want to replace the rocker arm bearings, maybe cam bearings and use a Regina timing chain (Regina was recommended by JBS) Anyone have the rocker arm bearing size and the Regina timing...

I bought boxes of very early kickstart knuckles back from Sweden and also those circa 2000-2003. So I made an arm up using the Husaberg knuckle and the aftermarket kickstart arm. the first photo is of the standard set-up: this is my first attempt which I've since sold so that it is getting...

Well my 99 FC600 started making a whine in the topend last weekend. Changed the oil today and had a lot of small metal particles in the oil. Pulled the cover off the head and one of my rocker arm rollers was shot, ate up the side of the cam lobe which appears to be where the metal in the oil...

I have a 99 FE501E looking to find out if the 2000+ models are still Non-linkage suspended. If they are PDS can you swap a newer swing arm on a 1999 model? My reasons are to upgrade the chain guide and availability of chain glides for the older 1999 swing arm. The glide is discontinued and I...

Can anyone tell me what swing arm bearings come in my old 94 FE501? I'd like to buy them before pulling it apart. Thanks.

just thought I'd let you klnow that I am having the swing arm polyurethyne protector around the front produced for both the very old and just the old Husabergs! 12005201 which was available from 1989-2000 (all models) 12005203 which has just gone out of production was 2001-2003 (all...

Does anyone know what is the difference in the swing arm bolt between 2004 and 2005? It is possible that this from 2005 is stiffer?

Hello ! Are the exhaust rocker arms from a 650 2003 the same as the 2001 ? Thanks

Between the needlre rollers in the swingarm there's supposed to be a tiny spacer. When removing the old bearings one of min disappeared. Has anyone got one to spare?

I blew out the swing arm protector (H12005203)on my 2002 FC470 which in turn wiped the blue frame protector on the right side (16017101). Seems both pieces are now unobtanium from husaberg.com/KTM. Any one have a source? The swing arm protector seems to be a simple strap of plastic type rubber...

What is considered normal play on the rocker arm bearings (axial) and axial play on the rocker arm itself when the shaft is in and installed on the head? My 570 today started to make some top end noise when idling. Heard it for the first time when I ran the motor pretty good and hot. It's like...