air

If i fit a DNA air filter to my 04 650 will i need the jetting set up again? It just got the std filter at the moment. On another note, I remember seeing awhile ago a 2 spigot inlet fuel hose connector for an Keihin FCR carb, can these still be bought? 2004 fs650 41mm fcr carb

Guys, Been looking for an air box / filter wash cover for my 2012 FE 570, can't understand why it's so hard to buy one...can anyone sell me one please ?

Hi Guys, 2012 fe450 stopped and will not start again, winds over, got spark etc... I noticed fair bit of oil in filter box, could it be the sensor in the air box the reason it will not start..mate said its most likely cause?. Rode the bike pretty hard for 100kms then stopped dead on rough...

Hi any one on here sell set of air filter mine are not good need replacing foam crumbling ;(

Hey guys, Probably a silly question but I need to replace one of the lower hoses on my 09 fe450 - once replaced & topped with new coolant do I need to bleed any air from the system? If so where do I bleed it from?

Still trying to figure this thing out I ve been finding black plastic in frame directly under air filter looks like it is coming from vent on top of cylinder im thinking its coming from guides or plastic bits around cam chain ? Has anyone seen this...

My 95hr 390 seems to get a build in the throttle body.. Anyone else's do similar?

I'm just about to rebuild my forks and need to know a starting point on the air gap for SM use? TIA

I am looking to get a couple of spare air filters and I can only find 1 Twin Air filter on e-bay but there are several from HiFlow. I have never used HiFlow before and was wondering whether anyone here have used and their recommendation on it.

Are the air and oil filters for the 70 degree motors the same as KTM XC models? Knowing will save me the trouble of explaining what a Husaberg is to the slack jawed punk at the local parts counter.

Can anyone tell me were i can find any 2nd wds air forks and rear damper?

Doing an air filter change right now I've noticed a small amount of oil sitting in the air box - probably about 5ml. There was a little bit of something in there last time but the bike sat for a while between rides and I thought it may have been a little air filter oil/grease leaking down. But...

Hi.. I haven't ridden my FS650 for almost 7 months.. So now I've got ready for a new season .. but.. When the engine is running, a lot of air seems to come into the engine oil? Is it normal (and I've just never noticed it before..) or?? With all new oil in the engine it gets almost white when...

Taking delivery of a FE 501 next week and there have been some reports of the plastic strap not putting enough pressure on the sealing surface and the motor sucking dirt. We all know this isn't good for motor life. What have current owners observed regarding this potential problem?

G'day again, I saw a post in her with an attachment where they were build an exhaust rear fender.....and they were using a two piece carbon fuel tank/tanks and a duct as a ram air.......can you buy this anywhere or did they make it? Cheers Cam :mrgreen:

(For an '[08 FE450) I bought a new foam air filter- No Toil. Looking at it in the packaging, it looks smaller than my stock foam. I can't tell for sure, but I don't want to open the package and not be able to return it. I don't want a smaller filter- my jetting is spot-on, and I don't want to...

My berg, which I've owned for about 2-3 months now, is giving me some trouble. It's a 2011 FE 570 (lovely bike, I adore it). I crashed it a couple weeks ago on some trails (for the millionth time), and it fell a pile of rocks from maybe 6 feet. I picked it up and rode it a couple miles to my car...

Anyone use this stuff on their Berg - or any bike for that matter? I've used it on my cars but am a bit hesitant to spray it into the air intake of my FE450.

98 FE 600 I decided to finally do the Joe usa recomendations and drill out the pilot and main air bleeds. I had a brain fart and for some stupid reason I drilled the pilot air screw out to 1.5mm. Can I leave it or should I epoxy it and redrill? I also noticed my main air bleed screw has a...

hello ! did some modifying on a kn air filter i had in the garage . now it sems that bike "backfire" when i lift of the throttle, i have the 38 idle jet in the carb now , is 38 the oem unit ? thinking of buying a 42 jet . the bike is a 2002 650 whit fcr 41carb from a honda mx . regards daniel