650

Hi! I have pressed in new bearings on the camshaft on my 650 Berg. I read somewhere in the manual that the bearing should be pressed in so you just got a little clearance between the bearing and the auto decomp device. But I cant find any information on how far pressed in the other bearing...

Had a great day at the ice today! Three bergs today, a 550, my 570 and a 650 :)

Hi I'm rebuilding my engine, and have found what seems to be a crack in the crankshaft:eek: It seems like it has started from the woodruff keyway where it seems to be missing a little piece. I'm wondering if anybody else on the forum has seen something like this? For all I know, it could...

Im looking for a 2005 crank for my 05 berg has anyone got one or knows where i will get one, thanks UK ONLY

Has anybody got a husaberg 650 clutch basket 2004 for sale? Thanks Dan

I have a line on an 05 650 with 2k miles. how many non race miles could you put on one of these before it would need attention.....assuming you kept the oil fresh

I want to make my FE to FS...... Would any one know if I can fit to my Berg FE 650 2003 below wheels with out clearance issues to my front or rear swingarm ??? These are BEHR OEM from KTM 690 SMC 2007 model with oem hubs and not cheap , due to they are abroad can not test them on my bike...

Hey guys! I have been looking high and low for a '07 Fe 650. None to be seen in Ontario since I have joined this forum. Now I see 2001 chassis with 2003 engine. It is Fe 650. I have read that they have weaker ignition/problematic? How about the carburetor, is it the same as '07? And most...

2008 FE 650 Hello, Been trying to chase down electrical issue for last month. Came home one night to no lights on bike. Ok! Was moron and had hit the starter button when bike was running... (never did this on Berg before)... so maybe my stupidity did it. Fuse was also blown. Had to run...

Has anyone out there tried to put a Rekluse on a Berg 650? Not sure if they make one anymore, or if they ever did? I know the moto probably has a bit too much power for a Rekluse, but I'm turning mine into a timbersled and a Rekluse would be helpful. Any info/experience out there...

Hello everybody, first post ever, I have a motorcycle workshop in the Netherlands, Amsterdam. Today a customer brought a Husaberg FS650. To Do list: -check valve clearance -Fix electric starter. (engine cranks too slow) -Install a contact key -Coolant seems to overflow sometimes...

Ok , there are a few guys who can chime in about this comparison. I had just been comparing the 650 to the 550 I just bought. But I thought it would be interesting to hear the differences between the 650 and the 700. I think its about 60cc difference. 628 to 690 or so. But interested in the...

A few weekends ago the motorcycle beach races were run at Grasstree beach , just south of Mackay NQ , after a couple of years break. The all in , 5 lap , King of the Beach final was won by a methanol burning , big bore 650 Berg piloted by Townsville rider Damien Koppe . Second home was 15 times...

hoping some one can help looking for a 03 husaberg fs 650 battery box had no luck looking eney were online so hopfully some one can help

please remove, wrong category.

Hi Looks like I have a leak from the crankcase on my 650 and might have to split the cases. As I only need to pull the cases apart and re seal the joint hopefully can I just strip the right side take the head off and then pull the cases apart. It looks like all the shafts etc stay in the left...

Hi If i want to put in a start motor at my husaberg 650 fs engine from 2002, what i need? Is it enough with a start motor and wiring and battery? Or do i need some sprocket or things like that? Emiiilz

Husaberg 650fs 2002. I buy it for 2 week ago. The engine eats oil, after riding around 1 hour and it has takes around 2-3dl of oil. Not smoking, and no leaking? Dont se oil in the engine glass when the bike is off and straight. I have adjust the valves to, with 1/6, but i think i have little...

Looking for a husaberg 650 in the uk contact me with what you have thanks craig

I just bought this bike and I noticed it had a lot of piston noise at idle along with a lot of smoke when the throttle was gunned. But after a 30 minute ride it all of a sudden had a drop in power and followed by seizure. It won't crank over now at all, the motor is frozen. I was just wondering...