650

Hello, I am trying to do a refresh on my conrod. Having never done this type of work before, I am not sure what is involved. The manual lists part 82030015100 Conrod Repair Kit ($450). This appears to include an all new: [I expect my terminology to be off, please correct me.] -rod -little end...

Is my 2005 650 supermoto made with a 5" rear rim from the factory or has the Former owner replaced the standard rim? I have trouble with Chain rubbing my 160/60 rear tyre and rim. Can you recommend a narrow sport tire for use on public roads size 160/60? Can i fit a 150/60 on a 5" rim or is...

hi im new to the forum. I drive an, fs, 650, real fun bike regards from belgium :D

Hey guys, I have a 2006 FE 650 with factory rad fan, and have found a full set of black plastics and tank off a 2005 at a reasonable price. I really would like to move to black rather than the Yellow and Blue mismatch. I'm 99% certain that all the plastics and tank will bolt on without issue...

Hello! Anyone got a flywheel for my bike?:D Is it possible to fix/refit broken one's with new magnets?

Hi all, with Flattracker, Mike the Mailman and Bomber on here with their Flattrackers i thought it was about time i put some details here of my lengthy build. It started when i got this in 2008, Great fun but too mad for the road so i put the knobblies on and started greenlaning again...

Had a hard time titling this topic. Basically, I would like everyone's input on the strengths and weakness of these Husaberg platforms. I am trying to decide which direction I should go. I would prefer FS models but I cant expect a FS to simply fall in my lap here in MN. Also, there is...

So here we go, as promised some pictures of my 650 fs full rebuild well under way......

Hey guys, I'm looking for a FS 650. And I found one that I would like to buy. So this week it's about to happen. I hope to have a lot fun with it. one quick question, is there a difference between an engine from before 2004 and after 2004. I heard that the engines from before 2004 aren't...

Not mine, but new old stock cases $199 "buy it now" price on ebay. If you're in the market for one, thats a good deal i think. Husaberg FE FC 650 Engine Cases New Unused | eBay

I am busy dissasembling engine and used a 2005 workshop manual I found on this site now the first page I am already in problems... On the photo in pdf theer is a locking bolt that is not on the 08 engine look at the pics. Can someone show/tell me where it is on the 08?

I have two engine cases for early 650 SEM ignition model One empty and One with shifter parts and oil pump I cant post pics here , so send me a email for pics [email protected]

Ok, here we go... The 'kit' no longer available:( 1: piston, JE? CP? But what spec? 2: liner? Westwood 105.5? 3: head gasket? 4: Studs? ARP? 5: Bushie's piston broke 6: I'm pissed and broke 7: Dr C is alien intelligence How hard can it be?:eek::eek: :p:happy::p

Hey guys my names Danny I've been lurking for a while on the site, just bought my 1st 2002 Berg 650 supermoto. Will be on quite a lot finding out all your hints and tips for keeping it good etc, don't mind the maintenance for the bang for buck.

Hi Guys, Im Gavin. Im relitivly new to the Husaberg breed. Infact the bike i have now is my first and ive fallen in love. My story began when i bought a bike without hearing it run or even seeing it. yeahhh i might have payed a bit too much for it however i fell in love with it. When i...

:confused: Had decided to go after a FE570 2010/11 model for my next bike. Looking to get one in the new year. My problem now is.... I've come across a 2007 FE 650 Race Replica, in fair nick. After reading some reviews and write ups they appear to be a great bike any suggestions or feed...

I had to remove my clutch basket in order to fix the kick start ratchet return. After putting the basket back in, and rolling the motor over a few times with the kick start, I attempted to set the engine to TDC. This is when I noticed that my alignment point on the idle gear and pinion gear...

I'm just about to rebuild my forks and need to know a starting point on the air gap for SM use? TIA

Hi My situation is that I have ordered a Snowbike kit for my Husaberg Fe 650 08 and right now I am in thailand and staying here until february. The company who is building the kit need some measure on my bike. Anyone who can do this for me? I need these measures in millimeter: 1:Its...

HI, just 2 questions for the experts. 1. I would like to replace the conical single springs with that: Kibblewhite 96-96000 (Valve Spring Kit 460" Lift). Is this the right kit or i should look for something better? 2. A second thought is to change the standard valves (35-30) with oversized...