400

Picked up a tagged KSO FE 400 and it was puking gas like the float is stuck/leaking. The problem seems to be a worn needle valve (worn rubber tip) so I'm going to do a total rebuild replacing all the brass parts. The CD1 Type Idle emulsion tube was missing so that will be added and I'll drop the...

Okay, Been sitting on a 99FC400 with a bad stator. (sitting because that is all I can do with it unless I want to coast down a hill). Anyone got one for sale. I'm pretty sure any 99 to 03 model stator would work, not counting electric start models. ANYONE got one for sale.

Hi. Im new here, and new w my bike.. so sorry if I missed if this subject already been up. But my FE400s starter just spinns the I press the starter button. I open the lil lid on the right side and saw that the gears goes around as it should.. SO what do I do now? And there do I buy parts...

Changed the oil on friday and now the bike wont start. I have had no prior issues with starting. What did i do wrong? How do i go about fixing it? Im not familliar with this bike as i have only had it a month. Any help would be appreciated. Thanks!!

Just a quick question. The 96 fc and fe 400 use the same motor and are the parts interchanable? Thinking ahead just incase i need replacement parts.

Hi to all, Couple of months I''ve bought Fe400 03. After one longer ride I've noticed some strange sound a the top of the top head. In this video berg is started at 1:50 and you can hear that sound (like a marble in cylinder). http://www.youtube.com/watch?v=6ZFVSqhv ... r_embedded If anybody...

Hi All just joined! hoping for some ongoing help, advice and tips to keep my FE 400 03 running great! I have one to start with, a bit embarrassing really! i replaced battery with new! but when re attaching the red wires to battery/ starter, i wasn't sure which way they went! i have the red wire...

I just purchased a 1996 400 with a 15/1 compression, I cannot get the bike to start with out having to pull it behind a car. Everything on the bike seems to be in great condition. Its my second bike I have owned and paid $500 for it. I guess the bike was raced in the china hat race a few years...

Can anyone head me in the right direction as to where to find a replacment timing chain? I had a helluva time finding the connecting rod but found one on ebay and bought it. That timing chain is the last piece of the puzzle, well then I need a top end gasket kit as well. Thank you in advance

hi there guys im new to husabergs ive just purchased my first one a fe400 supermoto on a 01 plate im looking to take the bike off road aswell i was just wondering what other off road wheels will fit my berg as i can not find any and can they be put stright on the bike have a look at the pic...

hello all i have a 2008 450 with a 380 kit fitted and wish to get a bit more out of it .and have read about use of a ktm 400 cam anyone tell me more thank keith

I have found a source for longer 35mm inlet valves. the 2004-2008 bikes don't need them but the old 400s (2001-2003)do! they have to pay £65 per valve ($110) for OEM but I have sourced some at £30 each about the same as the later 35s. regards Taffy

Good day all - I have the hi-lo switch on throttle side of handle bar . Is there a good aftermarket upgrade for this system ? G. S.

Dears, I'm new in the forum, and I'm really interested on Husaberg machines. I'm 43, intermedate rider, family and not much free time. I ride twice per month, therefore enduro is one of my hobbies. I owned in the past XR 250, XR 650R and recently sold my KTM 525 EXC (wornderful bike) and now I...

hi im andy and am new to this forum i have just bought a 2000 fe 400 have currently got the engine out as the barrel has a slight oil weep along with the clutch cover the person i bought it from had a new head fitted it has s.t.c. stamped on the side can any one give me any info on it had it...

hi i have passed my test having had bikes for over 10 years now,anyway i passed on my 125 honda so im on a 2 year 33bhp res licence,i have a 400 e burg 2003 that i gor for this,is has a hi low power switch on the bars can anyone tell me the power on both settings,ive found on the web that ther...

don't know who will get this.... I find the site confusing , can't get in to things i want to read. I am not good with computors . if anyone reads this please e-mail me at [email protected] !! I am a former HUSKY rider with a husaberg FE 400 E 2003 model. 650 mi. @ 40 hrs on the bike ...

rode both bikes on sunday at a MX track. not really fair to the 570 as it was the first time on it. the bike flicks from left to right so easily at speed giving the impression that all the weight is around your ankles! tight turning I thought was similar bu t the steering overreacts in ruts...

Just got myself a Berg race can for my FE400 2002 for next to nothing :D :D The bike feels so much more responsive and defo got more power :D . Only trouble is that it`s a bit too loud :oops: is there anything i can do like fitting a different end cap or anything else to make it a tad...

Gents, Got a mate that has an 02 FE 400, he wants to do an upgrade to his carb, seems he's thinking Kehin. Is this any easy thing to sort...?, has anyone done it that can offer advice or experiences. He's tried the jetting and it's improved but he's still not happy with it. Figures...