400

hi guys i wondered if if anyone could point me in the right direction i have a fe400e 2001 which has become a pig to start but when it does run it runs fine revs and idles as it should checked spark looked a little weak so had stator checked all fine one thing i have noticed is the fuel mixture...

Okay so I have a 1997 FE 400 that has a busted rocker cover and I am having the worst time finding parts for this motor. Could anyone tell me if I could use a rocker cover or any parts for that matter off of a different year model or different displacement husaberg? Or possibly even if I could...

Hey guys I am thinking of getting a second Berg to have as a spare. I came across 2 bikes. 2006 FE 450 (3500 miles) and 2003 FE400 (1100 miles) the 2003 is a smoking deal! Am I making a mistake buying the older bike? I don't think the 400 vs 450 is too much of a problem as all I do is...

I'm trying to find parts for a 97 fe400. I'm having no luck so far, if someone on here could point me in the right direction that would be awesome. I need a rocker cover and a few miscellaneous other parts.

Hello everyone!! Working on this 400FE and it has a no start problem. It backfires into carb, no matter what. Problem is also with the ignition, I cannot get the marks aligned. I set the piston to TDC, and the mark is way off. there are 2 marks on the rotor, and it has to be on the left one...

Hi Guys, Just got a *cheap* 09/1999 FE400 with an alleged ignition fault. Found a broken wire on the coil pack and voila good spark restored :) A 12mm plug has been bodged into the head, so a heli-coil back to 10mm needed. The real bad news is... still no starting or even a fire off ether...

When I got my bike (fe400e) it came with another full exhaust system. The headers are slightly wider but still fit. Will they be better for my engine or should I stick with the narrower pipes? Cheers.

i now have a rod kit available with the original 120mm centre to centre and thus correct LENGTH rod available for the 2001-2003 400s AND THE 470s. until now we have had to lose 1mm off the length. so back to a straight swop now. I also have a piston that is 0.4mm taller and thus will give...

hello, i'm looking for a conrod for my 2000 husaberg fe400.in pic there are the measures of it.can please someone help me? thanks, rui

Hi! I have a husa fe 400 -97 that the engine is completely broken on.. And now I can get my hands on a 650 engine complete with wireing, boxes and carburetor.. So my question is, do you think I can put the 650 in the 400 chassi without to much modification? I realize that the enginemounts...

Hi Gents, Just wondered if anyone had an FE400 and decided on changing the gearing? I'm currently running the standard 13T front and 48T back sprocket but was thinking of going down one on the front and potentially going up on the back! Any tips? Or experience with what works well...

Hi all, anyone knows if clutch spring from other manufactures(KTM, yamaha,..)/models(fe 450,...) fits fe400e 2003 model? Or if someone knows where to buy stock springs for my bike? Thanks.

I got my stator rewound by kris. Put it on, and now no spark at all. I don't know if I need to check the coil or what. I have not checked the stator cause I trust Kris did a good job, but just to be 100% sure I will. Any ideas on where to start?

Unfortunately mine broke done and cannot be repared :cry: Who can help me with an used or new part? I need the complete rockerarm cover (Cylinderhead upper part) for a FE 400 type 2003. Any help is welcome! Are there any sites I can check or any other suggestions? Please let me know! Rgds...

Hi all, I'm new here, this looks like a great place. I'm looking at a 2002 Husaberg FE 400 that looks to be in great shape, street legal and very low miles / hours. I have heard about the possible issues this year bike can have...Cam chain, Cam bearings. Del’orto Carb & SEM ignition. I also...

I have a problem with my FE 400 2002. When really hot it will cut out but only on idle. It starts ok when warm and you can wring it`s neck all day long but when it comes to a stop and it builds up a bit of heat it cuts out. It idles fine when cold/warm and only does it when it`s hot. Is...

Oil leakage through hole in the head :cry: Motor runs but oil spills. Is this reparable by welding or do I nead to buy a new one? Please let me know. Ideas? Best regards Cas Maarssen Holland

Motor runs but now has a hole in the head so the oil is bleeding out :shock: I guess i need to get a new/used cilinder head. :( Any ideas? Sites for parts? Used parts? Please let me know. Appreciate it! :wink: Best regards Cas

Hi you guys.. Anyone of You know about a slipon/akropovic/doma -or anything available for a Husaberg FE 400 1998 ?? I have searched & searched the web, but can't find anything.. :? Regards Lars from Denmark.

Hi All, I`m in need of some help. I lost some clutch fluid after a spill and now need to bleed the clutch.I`ve tried the normal way and aslo used a syringe to reverse bleed it and still can`t get the fluid in. I`ve cleaned out the bleed nipple that was blocked but still no clutch. I have the...