2010

Good evening Gentlemen, (and ****** of course) New to the group, and new proud owner of my first Husaberg. Here is a couple pictures from a ride I went on today here in Oregon. Cheers, Clay

I opened the valve cover to check the clearance on my 2010 FE 450 (125 hours). I found too much play on the intake side, with one of the valve that had more than 0.2mm. I removed the rocker arm and realized it was damaged, the shim as well had some marks and the rocker arm axis. Nothing really...

hello people hoping you can help. bit of back ground info: time before last when i was using the the bike it started great ran fine, stopped for five mins when to start and it just clicked as if battery was flat. Managed to bump her then rest of the day it was great, every time i turned...

This Z Start auto clutch has maybe 15 hours on it. Decided to sell the Berg and go back to my 300..Purchased new 2 months ago. Model RMS-827 $450 email: [email protected]

Hey guys, i've done a search but can't seem to find anyone with a similar issue. My bike appears to be running lean, occasionally bogs down on throttle pick up and backfires pretty bad when i roll off the trottle, but only seems to become apparent about 20-30 mins into a ride. I've changed the...

hi there everyone im super excited to own a husaberg from the little ive gotten to ride it so far I love it.. tons of power. if I can figure out the fuel problem then all be really happy

Starting problems 570 2010: Camshaft Looking to solve my starting problem on my 2010 FE 570, the only option left I think is a new camshaft (decompression). Of course I checked the valves, wiring to starter motor and relay. Replaced the battery. But still the cranking sometimes stops in the...

Hi. I have just got a 2010 fe450. Loving the bike so far. I'm trying to setup te suspension and found that someone hadn't fit the cap on the forks correcty leaving me with a rebound adjuster that turned forever. I have screwed the cap down now and just want to make sure I have fitted it right...

What's Shakin' everyone, I'm from NH and this is my first Husaberg. So far it's been 100% great! I got a few questions which all fit into different areas/forums here so I'm just gonna try my luck posting it all here in the new owner section. 1. Exhaust. Akrapovic or FMF? Which is...

Just sharing this just in case someone else bumps into this problem. My bike has this problem with the Akrapovic exhaust header starting at ~150 hours. The header just wouldn't stay in place and will drop from the mid-pipe. It causes leaking and excessing back-firing because the header isn't...

2010 Husaberg FE 450 for sale. This bike is in excellent condition with meticulous maintenance: - 2,700 miles - Titled AND licensed in WY Engine Extras - Rekluse z-start pro auto clutch - Dirt Tricks cam tensioner - FMF Power Core 4 silencer, header in excellent shape - EFI map...

I finished about a 30K ride on open double track in about 28 degree weather and although the bike performed flawlessly when I stopped there was a distinct boiling sound that I have never heard before. There was no coolant coming out of the overflow, just a boiling sound. After about 5...

Just wanted to check on here to see if anyone had any best practices for the install of the CV4 heat shield. Seems pretty straight forward but sometimes these things have surprises and this is the best place to check. Thx and happy riding!

I've noticed that my rear fender had snapped, so I made up some brackets made from some aluminum laying around my garage. The rear fender is now much stiffer and stronger. I have also been converting my bike to be road legal, to fit Ontario standard. Have a look at the progress.

2010 Husaberg FE 390. Asking $3900. 148 hours, 2300 miles. Recent dealer service and valve check. Very well maintained with a ridiculous amount of extras. Lights, Enduro Engineering Suspension, Rekluse Clutch with slave cylinder, GPR Stabilizer, Akrapovic titanium pipe, KTM fan kit, many more...

If anyone has a stock or low seat for a 2010 FE450 I'm interested in buying it. Also, interested in a damaged seat as I can use the seat pan with a new foam kit. Send a PM here. Thanks!

I've had a bit of a misfortune with my Husaberg (see the pics here). Long story short - lost coolant (at 70mph), engine got a little hot, internals melted and disintegrated. I probably don't need a complete engine, but it might be the most cost effective solution, so I'm throwing this out...

I have a starting issue with this bike I can't start it . I can only get it to turn over with a fully charged battery then nothing no starter engagement only starter relay clicking that is it. .Tried to jumper stater relay between contact nothing. checked all grounds, new spark plug ,starter and...

For some reason I cant get the engine to rotate in gear it is very hard to move especially in first gear but easier to move in 6th gear, do I have a seized engine or is it supposed to be this way.

Hey guys, can anybody tell me where i can get black plastics for my 2010 FE570?