2010

Hello, had anyone a simular problem with an blocked oil screen? I refreshed an FE 570 engine due to damaged big-end,also the cilinder and piston got damaged. So this was an expensive operation! Before the big-end went out my friend rode 2 hrs without cooling water in an enduro race, so it got...

R6 is displayed on the left hand side when starting, never noticed it before and it's not mentioned in the manual. Any ideas? :roll:

I have a Pirelli MT43 trials tire and TuBliss system ready to install on my 2010 FE450. I was just browsing the Internet and saw that a lot of people have issues with the taller tire hitting the mud flap. For those of you that have already done this, how is the best way to resolve the issue...

My 2010 FE450 has almost 2000 miles and almost 100 hours on it. The last few rides I have noticed that it puts out a noticeable puff of smoke when I first start the bike - even when warmed up. On the last ride, my fellow rider noted that there was a smaller puff each time I shifted. Is this...

has anyone else had the problem with the "O" key button on the digital speedo, my button has to be pressed very hard and on different angles to get it to work, it drives me mad, sometimes it just doesn't work at all. i use trip 1 is for keeping an eye on fuel and trip 2 keeps an eye out on my...

:cuss: :angry: Can you help,Stolen berg 2010 390 fe from Lee point, Darwin Australia 8th November 2012 any help would be appreciated please contact Casuarina Police station on 08 89227333

Is there a bushing or a kit available to lower the rear suspension on a 2010 FE-450 ? Thought I saw a post about this somewhere. If I could lower my bike approx 1'' or so It would be great...... :cheers:

Does anyone know where I can by a stock white fuel tank for my berg. I see them on bikes in Europe but can't find them anywhere else!

hy,i'm in search of this part. contact me in pm thankls

Does anyone know what type of power connector the radiator fan uses to connect to the bike? Or the part number for it? I pulled up the wiring Harness at http://www.cyclebuy.com/husaberg/manuals/2011_FE390.pdf but I'm not sure which connector is used to power the fan.

anyone done this conversion and want to provide some feedback? i guess its the biggest you can go with the 450 crank? How much more power would it make and what kind of power as compared to the 450(FX)?

Just got this one on trade - only 35 hours – 634 miles! Complete with Enduro Engineering hand guards, brush deflectors and EE aluminum skid plate. Rekluse Pro auto clutch. Husaberg factory clutch and front brake levers. Two-position ignition map switch, tank blanket, mid-pipe wrap and air box...

When the bike is cold the clutch does not disengage properly. What's the cause of this and how do you fix it? Regards Ross

"What's that about hindsight always being 20/20?!" :lol: Problem: Intermittent engine bogging issue shortly into ride. Similar to what it feels like when a 2 stroke is fouling a spark plug. - Engine would run perfect in garage and in staging area, but 5 minutes or so into ride this problem...

My FE 390 has always boiled gas and overheated; like my wife I knew what I was getting when I signed on. Two rides ago, I was over heating, boiling gas, and dribbling coolant out my weep hole 10 miles from nothing while trail blazing. In a hope to just get home I filled the radiator with water...

Went for a ride yesterday and my bike just started not delifering power trough the gears. It was as if i cant get enough fuel because when i stopped the exaust from the engine was red hot. So i replaced the fuel filter in the tank and tested the pump presure and it was right, still the bike isnt...

Difference USA FE 390 2009 2010 2011 2012 2009 New FE we all love (to some degree) 2010 Corrected a frame weakness near the searing head Removed Lambda (O2) sensor 2011 Added closed cartage forks Corrected a fuel injector issue 2012 Gas tank became clear Frame became yellow Oil sight...

Hi there i just bought a husaberg 570 fs and i have some problems. Ill try to explain my problems whit the bike.when i first got the bike and drove it it ran out of battery so i recharged it and tried to drive it again and once i stop the engine check what Volt its on it is at around...

Hey guys, Old Graphic person isn't returning my calls, New guy wants to do the bike. He doesn't have the template. Does anyone have it for the above mentioned bike they can send me? I didn't think it was this hard to get a custom set of graphix! It's the hardest part of the bike tear...

i would like to start commuting on my 2010 fs570 most of the time i am in a 60kph zone, any idea what sprocket set up i should go? atm with stock set up its not to good - at 60kph revs a bit high (using to much fuel) in 4th but 5th gear is stretch at 60kph.