2010

Want to powdercoat a rear swingarm black so im looking for a spare.

Hello fellow bergers! Looking for a 570 FMF megabomb and not the one for 390/450. If anyone has it and wants to sell, send me a PM

As the title sorta says, i have a 2010 fe390 that cranks over really well, but there is no power to fuses 1, 3 & 4, so no fuel pump or lighting and wont start. I have searched on the net and tried a few things, like put power direct onto no 1 fuse and the pump primes up no issues. I also have...

Sold

I was out riding, heard a bang, thought "that doesn't sound good" and then about 5 minutes later the bike ground to a halt and has not started since. I've tested the electrical system. The stator, R/R readings were Ok and the ignition coil worked fine on another bike but there is no power from...

Hi All I am looking for a set of new plastics and I was wondering where I could find some. Don't really care about color. They hard to come buy so anyone tried to fit some other plastics instead? Cheers

Hello everyone. I am doing the fork service on my 2010 FE450. I cannot find my service manual. Can someone tell me what kind of oil I need to put in them? Brand, Weight, etc. Thank you

Hi, My recently new to me husaberg FE450 2010 wouldn't restart after a 20 minute break - starter would turn the motor over but bike was dead - no F1 light or fuel pump. 2 days later i got a 4wd 25 kms into the park and recovered the bike that still wouldn't start. After the bike was...

Mine blew up. My local KTM shop said he could rebuild it but I need a new case and I'm looking at a $4500 bill. He used to work on the husaberg racing team and has a new top end laying around he said I could get a deal on so if anyone has a full engine or a bottom end that's fine with a blown...

Hi Please advise what kind of software you are using to read/clear fault codes from your bike. I need a software to communicate with a 2010 FE390. Android based software is preferred. Thank you for your support.

Guys. I use a 2010 model FX450 for my enduro rides. And punctured my fuel tank when I fell onto some rocks. Now I can either try to patch it (which I have and failed on about 3 attempts) or find a replacement. Is anyone here breaking an FX for parts or does anyone here know where I could get...

Hi new member, Been reading old reviews etc trying to decide whether to purchase an 2010 FX 450 with 20 hours on it or a 2009 FE 450 with 114 hours on it. The issues that I am dealing with are the type of riding I do is technical woods type riding. I can't test ride either of the bikes as...

Hi everybody Me seat just won't stay on.... it keeps coming out of it's front mounts.... it looks like when I install it, and lock it in it slides back. Is this common or ? Thanks for any info. Doug

New to husbergs, looking for some wisdom about a no start issue I've been having. The bike is a 2010 FE570. I bought the bike with 88 hours on it 3150km, started an ran fine when I went to look at it and during the test ride I took. My first day of ownership, I was riding in city traffic to...

My friend and I were riding today and everything was going fine until we stopped to check a map. We turned the bikes off for a minute and then when we went to leave his bike wouldn't start. It was completely dead, no electronics, no cranking, not even a solenoid click. He tried to bump it...

I just posted my FE390 for sale. Making room in the garage for a new car so some of the bikes must go. https://raleigh.craigslist.org/mcy/d/2010-husaberg-fe390-with/6325220874.html

edit: Found one!

Looks like I have a slight oil leak from the countershaft (output shaft). Behind the sprocket there's a spacer, O ring and a seal. Anyone know if the seal be changed with the engine in situ without splitting the cases? The OEM service manual isn't very specific. Cheers!

Hello guys, Im 33 years old and live in the northern part of Sweden. Just started with Enduro training, so I bought a FE 450 as a first bike. It was fitted with a Rekluse clutch and had around 200 hrs on it with a good service record. Now spent around 20hrs on it and starting to get a pretty...

I'm an idiot. Now that it's out of the way... I ripped apart the wiring harness on my 2010 FE390 and I can't remember exactly how it routed into the battery/rear sub frame area. Any chance someone has a pic ? The main problem is that I can't mount the tank cuz the main wire is in the way...