2007

Hi guys, if anyone has for sale factory akrapovic system for 2006/2007 fe550 - I'm interested. Cheers, Andy

Looking at the pictures and the drawings in the parts manuals, the radiator from a 2007 FE 450 (800.35.010.100) and one from a 2004 FE 550 (800.35.010.000), appear to have the same mounts and connections. Does anyone know if that is correct? Other differences that would make the swap not work...

Hi there, new to Husaberg. I drive a KTM 690 enduro R form 2013 and now recently a Husaberg FE 450 2007!! KTM a bit heavy for offroading, although not a bad bike at all! I decided to get a secondhand bike for "light" enduro driving. Two of my mate drive FE450's (2005 and 2007, so I decided...

2007 husaberg FE-650 e6 (USA) Chassis parts 2007 husaberg FE-650 e6 (USA) engine parts

Useful Xover parts 2007 ktm 525 RFS parts list suitable for 2004 -2008 husabergs particulary see main bearings and anything in the cylinder head

Brake leg oil seal went on the Berg, forks are apart and ready for the incoming parts but I can't find the oil volume for the WP4860 fork, for a 2007 FE450!! Not in the manual and my interweb search has not come up with a definitave answer!! Do any of you have the answer???? Thanks, Nick

Hello everyone, Just stumbled upon this picture: Does anyone know what skid plate is that and where can I get it (or anything similar, actually)? Thanks

Hi all just new to this having a problem bike has spark air fuel but turns over then backfires out exhaust have tried new stator & another black box no change all ohms seem right on pick up & statorhave had head of replaced inlet valves i,m sure i,ve got the cam timing right just won,t start...

Is that possible? If yes which model year? Please advice

Hey all, I just picked up a 2007 FS550e, been riding it a little bit but there's a noise that's bothering me. it sounds like a jetsons car at certain RPM. so far i've replaced the exhaust springs as they were incredibly loose, but the sound persists. only happens at low to mid rpm's and it's...

hi i was just curious, does anyone know if the later model front sprocket fits the 07-08 and older bikes ? hard to find a front sprocket for them or a 2t husky? cheers

Hi from Estonia ! I was riding off road and suddenly i noticed that when i pull clutch in or stop, the idle is very low and eventually dies. Started up good and after some revving it sometimes stays on good rpm but after some more revving or riding it still wants to die on idle. No bogging on...

I couldn't find a similar issues in the previous posts...so: Cold starting no problem, but after about 10 min of riding I have to put the bike in neutral and pull the hot start on the carb, crank it for 4 seconds and then give a blip on the throttle and it will start up. Would this be exhaust...

Hey, I have an 07 fe550 with 170hrs on the clock. I know the bike is good to go as far as suspension/ bearings go. It has new piston rings recently. I plan to do the T-chain and guides and all fluids before the race as well.... Any other ideas/must do's before a good long bashing? Thanks!

would like to know how much a new fs650 engine costs and if i can find one?

First off love the forum. Big thanks to all the regular contributors. I just got my hands on a 2007 FS550E with 550km and taken the step over to the dark side. I will be using the bike primarily to commute 6km to work daily during the summer. It may see a couple track days but I have an R6 for...

I was woundering if any of you have the stock stack for the Husaberg fe450 2011 CC fork. I`m having a 2007 sxf 125 CC fork and thought that the Fe cc forks stacks from 2011 should be a good start. The fork i have had ProAction valves in them so i got the stock ones and softer mid spring so far...

I just traded my 2000 FE501e, and got a left over 2007 FE 550e. Price was not really the determining factor over getting a new(er) FE570. I have looked at the new 70 degree bikes for a long time, great bikes. While there is no doubt that they are better in all (most?) ways, I still went for...

I'm selling my 2007 FE550 Berg with 32 hours on the clock. Bike is basically stock and ready to ride. Needs a battery but don't they all seem to when it's time to sell. Clear title in hand, so you can register it without issue or hassle. Very clean example at a very good price..... $3000.00...

Hi Guys, Had my bike for a while now and figure it's time to spend some dollars on some correctly sorted suspension. On a good day I might make the grade as an 'average Joe' but I certainly ain't no pro. I'm 6'4" and probably 115-120kg fully loaded and ride all sorts of conditions. I've done as...