2007

So I did a quick install on the Lexx slip on from 2011 KTM 350 sxf, I ended up not using the small 3" extension. Without it you can use to brackets to mount the can. I started the bike it does sound a little beefier, not idea power or anything, I put my stocker to ride. I don't know if I'll use...

2007 Husaberg FE 650. Excellent condition. I added the Bozarth complete dual sport kit (Dual Sport Accessories) and had it professionally installed by Motoxotica in Vacaville, CA. I also had Motoxotica adjust the valves, tune the carb, rebuild the starter sprag. Bike starts easily with...

I'm looking for a Bash Plate for my 550, Do any of the KTM ones fit? I already have a plastic one, but looking to see if anyone still makes them...

I have read/searched the service and owners manuals, and the owners doc, but I have not found any information regarding checking the ignition timing. There is no window in the stator cover through which to check the timing, and the generator coil is mounted in the cover. Sooooooo, how do you...

Hey guys, I recently aquired a 2007 FE650 with 49 hours on the clock. I thought I'd start a build thread to document my progress and hopefully get some advise along the way. The teardown: As it sits right now:

Just picked up a plated 07 FE450, came with extra set of plastic, extra set of wheels, aux fuel tank, plus a few misc parts. Need to clean carb since it's only been ridden twice since July 2012.

Hey guys! I just picked up a 2007 FE650 with 49 hours on the clock. I'm probably going to have a bunch of questions about where to find parts. The first thing it needs is rims (the front is cracked). Will a 36 hole Excel rim from a KTM fit? The second thing is stiffer suspension. Has...

I’m selling a street legal 2007 Husaberg FE550. It has installed supermoto wheels and a dirt set up. It comes with a lot of extras. The supermoto set up has a 320 mm rotor, Brembo brakes front and rear, a new rear fender (the old one that is on there is broken), XPC comfort seat, Tusk foot...

Does anyone know any measurements for a 2007 Side stand? I have the lower half of the old stand that snapped, But don't have the top part or the springs, And I was wondering if anyone has dimentions for it to I can make a new one Thanks

I'm trying to find a souce to purchase the gasket inside of the right hand fuel tank petcock on my 2007 Husaberg FE550. The complete petcock is listed as: "50307005000 GAS COCK MIKUNI ON/OFF | 2001". The petcock also fits some KTM's, it is a good, current part number. The petcock is...

I've had this bike for a year now and there is still plenty of room for me to learn from it. Will try not to overload this thread with pics so I'll have to sum things up a bit. On March 2013 I went down the road, 250km away from home, along with my father to get this Berg. We rent a...

Hi Guys, what are my options on exhaust upgrade for my FE550? Akrapovic system is discontinued and can't be ordered anymore.. would FS550 system fit? Someone told me that factory slipon will fit FS headers as they are bigger than FE.. not sure if its true as I did not have FS and FE next to...

2007 fe550e piston inspection - tools needed I'm about to check the piston in my 2007 fe550e that has not been worked on since new. I want to get all the tools and parts before starting work. 1. Looking through the workshop manual one thing I am unsure of is whether I need to buy a new...

Hi Guys, I think I need some help with my supermoto FE550e. I had it for 3 years now and managed to do about 500 miles on it.. just using it as nice weather bike on weekends. Got it from first owner who used it for fun and commuting about 30 miles per day, bike has about 3100 miles and 72h...

Hi guys! I went to my garage to test a few graphics I'm doing for my Berg and as soon as I got there, I immediately changed plans. This is what I saw: Tried to follow it's path in reverse so I could find out where it came from and got more droplets of oil allover: On the frame...

Hi! Just noticed today I'll need to change my front brake pads soon. Took a look at the manual and found that it has these at the moment: 50313030100 - BRAKEP. SET FR. TOSHIBA TT2701 HHB But it also has 3 other pads listed there: 50313030000 - BRAKE PAD SET FR. TOSHIBA H38...

Hey everyone, Need to get a horn mounted for Rec Registraction on my '07 FE550 But for the life of me cannot find where it's meant to go. I've looked through every manual and although they show wiring diagrams there is no manual which shows where the horn mounts. Furthermore the...

I've been looking at a FS650 07. I got no idea about the "service intervals" on the bike, and the owner have driven around 130 hours without changeing the (piston?) and it also has to change the "timing chain" Is this expensive to do, or hard to do by myself? Where do i buy it? And how...

Hi! The goal here is to get that beautiful headlight from the 2009 models on my FS550 from 2007. Will it fit? This is what I'm talking about (in black): To fit in here: From what I can tell, even the front fender is the same in both years...

I own 2 bergs 2007 and 1997. 07 is 650 and 97 is 501 wondering what parts available on both bikes are on big parts rods cranks pistons cylinders etc. both are mortarding and love them but both will be needing some maintaince I ride them both hard do track days any one can chime in thanks Edit...