2004

I have currently found a local 2004 fe450 with 2700 miles and 105 hours...bike is super clean almost showroom condition and previous owner was very meticulous with maintenance. I currently have a 2003 drz400 with 7k miles and just want a little more wow factor along with a little better off road...

Hi Wondering if anyone may have any ideas on tracking down any of those " BIG BORE " pistons kits for 2004/2005 FS/FE650 Engine, and liners ,that JBS racing use to have available . ( or other possible supplier such as Arias or Mahle or JE ? ).........and aftermarket rods such as Carrillo ? (...

till 2003 the motor numbers were on the right leg side and consisted from 7 digits, concrete example: 4013198. this is a real number on an engine from FE400e with a sleeve and water pump down (not on camshaft). That means it is younger than 2000. But I am not able to determine the exact year of...

Hi guys, I'm wanting to have a dual setup on my 450 Enduro bike. I've looked through the forum and can't really find the info I'm after. I want some info on what I'd need to do to convert to supermoto. 1, will I need to alter the suspension? 2, brakes? 3, chain and sprockets? 4, what wheels will...

hello, does anyone know whether a 2004 berg stator will fit an 02/03 model? thanks

Hi, I need to replace the front brake switch on my berg and think that I would prefer to go down the path of the banjo bolt style switch instead of the fiddly little electrical switch under the lever (gets caked in mud and ceases all the time). Is there any reason not to make this change...

I am the proud owner of self destructed 2004 650 (valve into piston, bent rod, smashed cylinder liner etc etc.) but hey I got it cheap. I have just purchased a very low hour 2003 650 motor with all the eletrics and I have it running in the 2004 frame. I'd like to use the 2004 electrics as much...

I've replaced the rings on my 2004 FE450, and after starting, the bike seems to be vibrating and feeling more lumpy than before. I split the engine from the right hand side, and didn't touch the left (clutch side) at all, leaving the covers in place. I found I could lift the crank slightly...

Hi guys! Does anyone have a parted kickstart shaft of a fe650, or does anyone know how much it costs to get a new one?? I would appreciate your help!

Hi guys! Im new here, and i was wondering if anyone could help me out... I have a 2004 Husaberg Fe 650 and the electric starter is rubbish and I was wondering if I could fit another starter form a 2007 KTM 990. Pls help me guys :), Tom

Hi guys First post and first issue with my berg. I cannot select neutral. If I come to a stop and try and engage neutral it wont go in no matter how hard I try. However when moving forward and I dip the clutch I can select it!!! (easily) Any ideas? cheers Dave

Hey guys, I'm new to the world of the Husaberg. I was planning on buying a KTM, but can't seem to find one in my price range. I did find a Husaberg however. It's a 2004 Husaberg FE450e. The engine was rebuilt after 160 hours, and it has 40 hours on the new rebuild. The bike has a 2006 radiator...

Hi all. Please give me an answer where can I buy balancer bering? I don't want to buy all balancer with bering included in the service shop - it is to expensive

Can anyone tell me if the tripmaster switch (three wires/buttons) will work on a recent KTM exc type speedo - I dont know what speedos were on the earlier Berg enduro bikes. Thanks Mike

Berg Gods of Knowledge and all Knowing of things Berg..... Ive got my eyes on a very low mileage 2004 FE550... so my questions... did Berg get the warts out of the top end by 04? cam Cam bearings Stator E start strength Valves Etc? anything to look at or for? I had an 01 FX650...so as much...

I have owned a '04 650 since May 2011. It arrived with just 37 hrs and it came with what some consider to be FS jetting, but I believe this to be NZ specs where there are no restrictions. The jetting came as 160mj, 200maj, ekr needle, 45pj and 100paj. I purchased one of Taffy's kits and...

My battery was goin flat on the berg, when I checked it's not charging as it only reads 12v when running. Any ideas what the likely cause is? I'm thinking rectifier or stator but not sure.

Hi I'm not sure if my throttle cable is standard or whether it has been modified but it seems like it is too short! The throttle cable has always been routed down in front of my bars, I have just put new higher rise bars on and at the same time I wanted to route the cable/s behind the bars as...

Hi guys, Are brake pads available through KTM dealers? If so is there a part number that they would recognise for a set of front brake pads on a 2004 FE 450. Many thanks! Ben

Just wondering what 'special' tools I would need if I decided to strip and rebuild my forks? Does anyone know of a good guide for someone who has never done it before? Thanks Ben