2004

Hi, will I fit a 160 rear on a 2004 FS450e? Got a 150 on now but I'm considering changing to Pilot Powers but the smallest is a 160. Will it fit in the swing arm, will the chain nibble the tyre and will it affect the handling badly as I would of thought it could mess the profile up stretching it...

easy question for you experts: what spark plug is the best choice for FE 550 model 2004 by proven experience of course Klaas

And replaced by a 2009 berg!!! (450) i'll be doing the 2009 Alto Turia rally in spain, any musthave rallygoodie suggestions are welcome!!

Hi there, Does anyone have experience with the repair of the radiator by a specialized shop? It seems to me that the radiators are not so easy to repair as the radiator block seem to be glued/soldered from the inside before the final assembly of the upper and lower compartments. Any shops...

I can buy a second hand husaberg force part slipperclutch. It was fitted in an 2007 engine. Is it possible to put this slipperclutch in a 2002 engine? Hope so because the price is really good 8O

Anybody know if a seat from a 2004 Berg will fit right onto a 2008? I've got a chance to pick up a used Renazco and want to know if it will work.

Hi. I just bought a 650 fe 04 from my local dealer (In Mexico...) a few days ago. I have less than 3 hours of use and the valve`s spring just got broken...and something got into the cylinder....making all the worst thing you can imagine. the bike is mounted with slick tires and i just use...

Howdy all, u may have seen my recent replies to the "exhaust leak" post, & I'm not sure if I'm going to be fixing this tail pipe problem any time soon.... Just as an alternative, does anyone know of a good (noisey!!) race slip-on muffler that does not require different pipes for a 2004 FS650E...

Hi there, can anybdy tell me, if I can outfit my 1997 frame with 2004 triple clamps??? If yes, is there a change in geometry? Thanks so far

I have a question........... On my 2004 FE550E the solder on the bus connection on the stator for the lighting circuit keeps melting off and then there is no more headlight. I don't usually use my headlight very much, and this problem first appeared about a year ago. Say 45 hours of...

Hi guys! I have been using engines from 2002 and 2003. They are updated to address all known issues from pre 2003. I have no problems with the cylinder head and no problems with the SEM-ignition. The big end, the mains, the balancer bearings, the keys for the sprockets on the left side are the...

hello. anyone who know the diameter on the wheel bearings front and back on husaberg fs 650,2004 modell? i need the diameter because i shall maybe swap the original sm wheels against ktm cross wheels from an 02 bike so i need to now if the bearings from the berg will fit the ktm wheels kim

I've got a deeply pitted valve seat on my 2004 fc450, and everyone who can fix it is on holidays here for the whole of August. I have a complete head from an 03 650 and was wondering if it could be used without any major modification

Hello, got a FS 450 2004 very little hours on it. What do I have to check on it? Valves, camchain? Can the camchain be updated to DID from 06 model? Is the Belray EXP SAE50 ok oil for this bike? regards, Jarkko

Hello, got a FS 450 2004 very little hours on it. What do I have to check on it? Valves, camchain? Can the camchain be updated to DID from 06 model? regards, Jarkko

Bike bandit has has part listings for 2002 and 2004 husabergs but no 2003??? when it comes to air filter, wheel bearings, sprokets, ect... is the 2002 or 2004 all the same???

I just got my first Husaberg (FE650E 2004) and its madness ! My bike came with both supermoto wheels and enduro wheels. The local Husaberg dealer and the only other guy I know in my area who has a Husaberg (2004 FS650E) said I need to get a steering stabilizer. For the little experience I...

what do you guys think here?how many hours of use before it is time to change out the rocker arm on 2004 and newer Bergs?i am not so interested in who flogged their bike the longest before changing them.rather,what would be a prudent amount of use relative to routine Berg maintainence.i had a...

Hey Fellas, Which model year you beleive has the strongest engines????

Hi all Would 2004 SM wheels fit a 99 elduro with right way up forks? or am i on a hiding to nothing because 04 onwards have fat spindles? anyone know if i'm just buying a headache or wasting my money? cheers chris