2004

Hi All, I only want the starter button and kill switch/charging circuits on my bike. I have taken off most of the wiring and all the lights etc. Just need to know how to connect the reg/rec to the circuit to charge the battery now that the wiring loom has been disconnected. Can any of you good...

For sale is my 2004 fe 450. Has around 120 hours I believe, Has a bunch of aftermarket goodies and still runs good. Not sure what to ask for it, I'm open to offers also I can send pictures on request. Thank you

On acceleration, hard or soft, will randomly die and will restart only if engine stops reving. Meaning if bike is still rolling i pull clutch to allow engine to stop reving and release clutch slowly and engine will start again and run normally. Also will restart normally on kick or e-start...

Okay - I'm trying to 'find the love' for my electric start, FE450 2004, she starts first/second kick reliability but struggles to start off the button? New fully charged battery, checked starter brushes & motor turning at a good speed, checked stator for dirt/rust build up, clean, fitted new...

With engine parts becoming hard to source its becoming increasingly difficult to understand what parts will work with others when you locate NOS in some of the old Husaberg dealerships Point in case is the timing chains fitted to bikes from 1989 to 2004. My understanding is that Husaberg (and...

for sale husaberg 2004 gastank with rad shrouds. Tank has been made smaller in the midde part for Supermoto use. Also fork guards for sale. See pics. worldwide shipping PM if interested

Hi to all, After oil & antifreeze change, I rode bike for 20 mins and it shut down, rear wheel locked. When trying to kickstart it, kickstarter was not hard (low compression). Managed to start it, white smoke was coming from exhaust. When engine is opened, piston and cylinder where damaged...

Hi all! Long story short: I bought a what I thought was a 2004 FS650. Turned out the frame was, but the engine was a 1999-something-else. Cablework was butchered. I bought a 2006 engine, most of the loom, a new CDI etc etc. My mechanic is trying to sort out the wiring now, but we have a few...

Hi.... I am new to here and also a new husaberg fe 501 2004 owner.... I purchased today ☺ I am new to enduro bike and have come from riding bikes on the roads (GSXR 1000) I wonder if anyone on here could help me.... ?? My husaberg spits coolant out of the overflow at times... is this...

I've had a couple of hundred made by kibblewhite and they should be in stock in the next 2 weeks if the Customs don't knab them at the border for customs! they flow better than the OEM part otherwise they still use a clip and are made of unobtanium as ususal. regards Taffy

I removed the carb to fix a leaking float needle valve and noticed the rod for the accelerator pump was missing. I bought the bike used and this is the first time to have the carb open. The bike runs great (as far as I was concerned :( ) so I never suspected a problem. It doesn't seem to...

2004 FE450 engine damage My bike is 50h after rebuild. Start after first kick, don't smoke, runs great. Today I opened the engine to replace cases (because they broke) and I see this: My question is why? All engine bearings look like new. The lack of any other damage. Only many aluminum...

2004 FE450 Just changed over my dirt wheels to sumo wheel How do I reset the speedo for 17" wheel Nothing in my owners manual When the speedo lights up it shows 2205 for a few seconds and then goes away 1825 is the # for sumo wheels? Thanks Frank

Husaberg 650 2004 akaprovic exhaust wanted,

If I put my choke on and start bike up, when I take choke off there is a loud metal knocking noise coming from engine, it only does it when cold, is this normal? When bike is warm it ticks over fine it's just on start up when I take choke off it makes loud tapping noise then cuts out. Any help...

Does anyone know what is the difference in the swing arm bolt between 2004 and 2005? It is possible that this from 2005 is stiffer?

Hello. I am new in this forum and about to buy a Husaberg. Can anyone help me? My friend is selling me a 2004 FC450, and its very cheap. What are the differences in FC450 and FE450? Can i put a headlight on FC? The FC engine which im about to buy is 57hours ago rebuilt, how often do it need...

After last ride I noticed that I had cracked engine case. The previous owner already welded that place. And the weld broke. The question is why? And whether it makes sense to weld it again? Can be welded without opening the engine? Engine is 9mth after rebuild.

So I found my oil leak. Appears to be coming from the lower forward area of the case right at the seam. I looked around here but only found the same issue with a 650. Would this be the same as my 450? I also found my engine breather hose has a split in it and lots of oil up in the hose between...

I just purchased a 2004 FE450 and was wondering if anyone could answer a few questions for me. I looked through the other threads and posts and could not find the answers I am looking for. First of all, what is the secret to kick starting? She dosent seem to want to start when kicking it over...