2004

Hi, about a year ago my timing chain broke because a nut from the valve adjustment unskrewed itself and fell into the chain. This happend in low speed/ 1gear. It was ’’easy’’ start at this time. Just finished changing exhaust valve and mounting a new timing chain, tensioner, headgasket etc...

Hello! (There is a short/TL;DR version at the bottom of the post) At first I'd like to apologize for yet another post about flakes in the oil. I know there are quite a few of these threads and should this one be considered unnecessary I will remove it. :) To the case at hand: I...

Hi folks, I've bought a 2002 470,fitted with a 2004 501 engine, the camchain had snapped due to a nut falling down the camchain tunnel.. I bought the bike like this, so I've rebuilt it, but im not too sure about the valve timing, can anyone help? Cheers, shug. I managed to find a 2005 manual...

hello everyone i'm a Husaberg owner in Hungary. My question would be how many faces of the timing chain in the 20004 model. thanks in advance

Hello all, this is my first post as I dont actually have a husaberg yet. I have ridden xr650r's xr400s xr250s and some street bikes. I am 19 so I havent had a chance to gather up a whole bunch of bikes haha. Currently ride an old xr250r. So, theres a pretty good deal on a 2004 fe501 near me...

Does anyone know if the triple clamps are the same on 2004 bikes? Looking for some for my fe450, found some on ebay that say will fit all 2004 to 2008 models Thanks

Hi all, had my berg since may this year and i love it. Really fills me with confidence at enduro and technical routes compared to the kx250 it replaced. Im just wondering what are people running sprocket wise to aid stalling at low revs? I use it for green laning and abit of fun at the local...

Hey All! I want to run through a brief history of an FE650 I need to move to someone else to find out what the UHE populace thinks I should do as a next step. I have an '04 FE650 that was purchased from the Corner Grass guys here in Alberta, Canada after they won the Endurance Ice Racing...

Hey just wondering if anyone can tell me best way to wire up a led light bar on my 04 husaberg ? Should I wire it directly to the battery or is there a Easyer better way like could I use the stock head light wires ? My light currentley don't work on my bike because I dont have the hand controls...

Gents. New member. Picked up a 2004 FE450 yesterday. I’m after a Side Stand for it. Stand, springs, c clip and bolt. I can get the service items locally but I see the side stand is a NLA part. I’m located in Australia. But happy to get one shipped from anywhere. Thanks :) Steve

Just purchased a 2004 husaberg fe450 with only 2400km. From Ontario Canada Just looking to get some info on them or know of any common problems or anything I should look out for and reliability? Bike starts first kick pretty sure only thing it needs is a new TPS as i think the one on the bike...

New conditions - Original, taken off the bike from new and never used. Open to offers.

I have bought a 2004 fe450 and am looking for a wiring diagram , I am wanting to get rid of the ign barrel and just need to know what the 4 wires do, I have 2 yellows, a brown and black with yellow trace, one of the yellows goes live when staring and is live while running, I take it the brown is...

Hello, I'm rebulding my old Berg and i'm not sure what to do with pink,grey and white wire from speedo. I know one of them is sensor wire,think grey one, but what with other two wires? Everything was melted in fire few years ago so i don't remember where it goes and there is nothing about it...

Hello, Is it possible to fit headlight and f. fender from "newer" model 2009.-2013. on older model (Fe450E 2004.) and if it is, do i need to do some custom work ? (except wiring) Regards

Hello, Decided to part out my husaberg fe450 2004. I have everything, excluded wheels and wiring. If you are interested in some parts, please contact me via email [email protected] I'm located in Lithuania, Vilnius, but I'm sure we will find solution for shipping. Here's a link to...

hi guys, i'm a new user. i'm buying my second FS650. i already have a 628cc and i'm buying a 644cc. the problem is that the ex-owner has disassembled the engine. i've never done before. but i would like to assemble the engine by my self. (i probably have all the tools) is there a...

so the little French boy is here with his question ^^ someone tell me the 2004 is not reliable , and the 2005 is reliable . but nobody can tell me the difference , specially on the "low engine", is it the same crank shafts ? bearings ? how reliable an engine from 2004 ? (this guy tell...

Morning boys and girls I'm looking for some advice... My fs650 appears to be loosing coolant somehow and it's got me a bit stumped ! I fill the rad completely full to the point of overflowing (it drops a little out the overflow ) and then go for a say a 10 minute gentle ride and then when...

MrSuperSport-MotorSports in beautiful Coeur d'Alene, Idaho area just acquired an 04 FE450 that is complete except missing forks & wheels. Just seeing how much interest there is before dismembering & listing on eBay store. Engine turns over & there is supposed to be a title.