1999

I am completely new to Bergs, other than I know they make some cool bikes. What can you tell me about the 99 501s. Are there things to look for.....problems? Is there any aftermarket support? Is there any need for aftermarket support. Here is the bike I am looking at...

Hi everybody, My FE 600 (1999 model) has the following problems. Consume oil (500 cc each 500 kms) I can fell that vibration is increasing I was talking with same mechanics (they know well Husaberg) and they told me: Vibration increasing means that crank shaft is getting unbalanced as...

I picked up a 1999 FE501 cheap - it's got no wheels. Previous owner had it supermotardrd and sold the wheels to some other 'tard. A guy on ebay is selling a set of wheels for a 2000 - but the front axle he measured for me is different from mine - so it doesn't look like it will work. My...

I picked up a 1999 FE501 cheap - it's got no wheels. Previous owner had it supermotardrd and sold the wheels to some other 'tard. A guy on ebay is selling a set of wheels for a 2000 - but his front axle is different from mine - so it doesn't look like it will work. My axle OD is 16mm...

Hi, New to this forum and the new owner of a 1999 FE501E I've downloaded the workshop manual from this site (Thank you to the person who made this download possible). As the bike did not come with any service or hours history: My intention is to pull the engine. check it over, change...

one more and then it's 2000 members this site is growing fast

Please forgive my stupidity Is the elduro the electric start enduro? If it is, do people run it on standard jetting? I bought one three weeks ago and it runs ok at low medium revs, ticks over fine, even starts fine (when cold) and up to around 3/4 revs and above. Then its ewwwwwwwwww...

I've found a 99 FE400 (kickstart-only) that I'm considering buying, supposedly with only 2100 miles. I'm fairly confident it's a good bike; my concerns focus mostly on parts/maintenance/reliability. There's no dealer nearby that I'm aware of (western SC), but I'm a fair shade-tree mechanic...

Am I correct that the stock forks (WP MX Extreme) on a 1999 FX501 are 50mm? thanks, Walter

I noticed that pages 31 (Cylinder Head) and 39 (Crankshaft & Gearbox) are missing from the .pdf file. Does anyone have it and can either put it in the Download or email it to me. Thanks, Walter

My 600 lost all power to the lighting system (i.e. head & tail light, turn signals, horn), whether the motor is running or not. Electric starter still works and the motor runs but everything else is dead. Any suggestions what the probelm may be? Any help is appreciated. Thanks, Daryn

does the chain guide swing back and forth?? based on the parts manual pic it looks as though it does.

Hi all. I'm Italian rider (Catania). I'm sorry for my english (very bad). Last week i'v seen an Husaberg Fe 600 '99. Seeminghly bike is good. The engine drives well, and there is only a little ticking from the valves. The bike has an exhaust under the tail, and often there is a crackling e...

Does anyone know what the stock settings(clicks out) are for forks and rear shock on my 1999 fe400e......nsman

Hi I have been measuring my stator (which I think is just fine) and I can only find the specifications for the post 1999 models. Does anyone have the specifications for the pre 1999 models?