1999

I have a 15 in the front and a 41 in the back. Iv somewhat topped out at about 85mph but I didn't like how high the rpms were. What is a good set for a higher top speed, what would happen to my low end speed, and what is the redline rpm on this bike?

New to Husaberg ownership. Have a 1999 FE501E I just picked up and intend to Dual Sport it here in Nevada. Will the side plastic and rear fender from a 1996 600 fit my bike? If not, what other years and models should I look at for interchangeability? Thanks in advance for any replies, JaX

I want a pair of crosser tyres for a friend for Xmas but don't know what size he needs. Can anyone help? I think they might be 130/80 18 rear and 90/90 21 front. Is that right? Any recommendations on pure off road tyres? Thankyou in advance :)

I have a PDF of the service manual for 1999 Husaberg FE501 and i had come across a section on the electric starter. i am currently looking for one that would fit the bike, does anyone know where i should start? the manual doesn't give me any specifics on what brand or size to get.

I have little problem... Today i use a lot of electric starter ( i use new FCR 41 and change jet's ) and now he's broke... Don't work. I mus take new, but i don't know what is name of electric starter. Know everyone what's name? Specification? To fe 400 can be from r6 or cbr 600, but to fe 501...

HELP!!! I took apart the clutch cover to put a new shift fork in. The kick start gear came out when I pulled the cover. I am not able to get the kick start gear to stop grinding on the case and it has no tension on the up stroke of the kick arm. I have the spring in the back side of shaft and...

Hi guys I was thinking of rebuilding my own stator, can .anyone offer any advice as to how to tackle this ie, best wire , resin, tips , I'll post picks and progress reports to let you all know how it go's. Regards Ben.

Hi guys, my Husaberg 501 is not starting after doing the Valves .. have checked the stator and it lines up with the first line ok? could anyone give me a check list of things look at in order ?... my foot is about to fall off ... it sometimes starts for a little bit back fires a bit then dies...

[attachment=0:32dtn20e]20120728_191751.jpg[/attachment:32dtn20e]Hi Guys, I would like any and all info anyone might have on the electrics of a 1999 FE 501. I am trying to get it sorted for a rec reg setup so all i need is a head light,tail light and horn this picture is what im working...

I have a 1999 FE501. The Coil & Stator have just been replaced. It is now relatively easy to bump start but it is near impossible to kickstart. The Coil is a Genuine Husaberg Coil p/no: H25021602. The statour is a Electrex World Stator p/no: ST5500L. I had the same parts replaced about 2008 and...

hey I have a cracked wheel on my 1998 fe 600, i found a 1999 fe 600 wheel on ebay are they the same?

I have no connection... but thought this was a rare find.. someone selling a new, recently unpacked 1999 FE501 on ebay...

I have the opportunity of purchasing a 1999 FE400 with only 3000kms on the clock and in good original condition with full service history. Being new to the brand what should I be aware of as in pitfalls and well known problems with this model bike.Cheers.

I have just bought a 501fc 1999 and i am having trouble starting it.I think im doing right because it has started a few times but i cant get the nack to do it every time please help.

Where might one find a clutch cable for a 99 501 FE? Preferably in the USA.

I've been doing some much needed maintenance on my 1999 600FE. It had an oil leak coming from the rocker cover so thought i'd go in for a look. Reading on here with starting issues the decomp mechanism on the cam can wear and not work. But when i pulled the cover off there is no leaver or cam to...

Anybody taken a shock out of a 99 bike? Cant get mine of the swingarm, took the bolt out and its solid. The shock moves about on the bearing but I cant budge it out of the swinger. Am I missing something or is it just 11 years of sitting there? :( Tried levering, hitting , swearing but its not...

I just recently bought a 1999 fc501. rode it once, it ran fine, washed and parked. no spark now. cdi ohms out to specs. I've taken the CDI cover off, wire brushed (by hand) the light rust off the stator unit and the flywheel. DOES ANYONE KNOW what the ohm values for the coil? any...

Gents (and ladies) - I'm new to the site, though candidly have lurked every now and then for about 2 years. I bought my Berg used in 2003 while awaiting the arrival of a new KTM 520 exc, expecting to probably sell it once the KTM arrived. I liked it a LOT on the trails of Hungry Valley. I also...

I'm getting ready to sell my all original, one owner bike with Baja Designs kit. Bike still has original tires and sprockets. Never had any mechanical issues. Needs fork seals, but thats about it. Can you guys give me an idea of what I should be asking for the bike. Thanks for any help. If...