1999

Can anyone give me good directions on removing the side case and replacing the clutch. Last time I took the side cover off, I didn't do it correctly and took the kick starter off and then the cover. I was told, after paying to have it put back together, that it throws off the timing of the...

tomorrow I'm gonna try to adjust the valves on my 99 fc501. I've never done this before. I heard you can tighten your tappets down to the vaves stem then back it off about 1/8th of a turn.. I started to try tonight, but I couldn't tell when I hit or was pushing the valve down. is there a trick...

I have three husaberg bikes that I just recently purchased. 1998 fx600, a 1999 fx600, and a 1999 fc501. All three of these bike have been sitting for who knows how long. I cleaned the tanks and carbs out and changed the oil. they all fire up and run, but I think the clutch on at least one is...

Hi folks out there, i am from germany. I'm looking for an original exhaust pipe for 1999 FE600. Is there anybody out there who have one and will sell it ? Thanx.... Stephan

The six speed trans is giving me problems I suspect shift forks but wanted any opinions. My bike slips into what seems like neutral , if I hold it in 1st with pressure down it will go, if I left off the gas it is in neutral again, go to second or 3rd or 4th if I don't keep pressure on the shift...

Have bought a 1999 FE 600. Front: WP Extreme 50 mm Rear: PDS Shock I want to use them mostly on a cross track, want a suspension stiffer than enduro, but not so stiff as a cross bike. something in the middle (cross country) on all accounts I am heavier as the normal 78 kg rider. I...

Hi all, sorry for a further thread to this theme, but maybe you can help me quick. (link to fitting threads maybe) A Fe600 1999 has a engine rebuild in 2005 by a husaberg garage. The mechanican maked a test drive round his garage, all seemed ok. one month later he got a new cdi with new...

I have an offer of a FE600 1999 model. stands since 2 years by my dealer - probably with stator failure. the Dealer does (2 years ago) a new piston, conrod a.s.o for 1380€ and a ignition modul. After this the bikes runs about 20 min. The owner was frustrated and pluged no...

Can I add an Electric Starter to a 1999 FE501?? Getting old, and sick of kickking........

I was looking through some of the posts and the DOC and I see people talking about changing there alloy sprocket to the 2003 steel sprocket. I have a 1999 FE 501e and I am in the middle of an engine rebuild and this engine has the alloy cam sprocket with a Regina chain. Is it possible to fit the...

When I bought my 600 it came with a blue larger gas tank he said it was for desert racing, anyway today I had to install a new carb to frame boot and changed the tank over to the big one. The bolt holes on the side did not line up with the frame but everything else did. Is there a bracket that...

Hello all, just got my first Berg after many years of lusting after one. The bike came with what I presume is a 1999 501 parts bike (the seller was moving and his wife was making him clean out the garage). I have a yamaha 660 motor sitting around..anybody ever heard of a hybrid Berg?

Hey gang. Finally got rid of my predictabe orange austrian girl and picked up a Swedish Babe. Its the 1999/2000 USA Super TT National Championship winning bike. Rumor has it that its a factory bike. There is a lot of strange welds at the steering head, do they all have that? In any case looking...

I found some excel wheels for sale off of a 1999 501 and would like to have a spare set for quick tire changes from street to dirt for my '99 FE600E Will these be a direct fit or do I need to modify them some how? Or if anyone has a wheel set for sale that will fit. Thanks Tom

I found some excel wheels for sale off of a 1999 501 and would like to have a spare set for quick tire changes from street to dirt for my '99 FE600E :? Will these be a direct fit or do I need to modify them some how? Or if anyone has a wheel set for sale that will fit. Thanks Tom

I ordered floats for my FE600E 3 months ago Husaberg part #ph25016801 and they are on back order until who know when. Dellortos part # is 15760.3 float single 4g. Any idea where I can track this part down. I would greatly appreciate it. Tom

My dealer told me that gearbox parts for any pre 1999 engine is unobtainable. No more parts available anywhere. Period. Can this be a fact??

hi all my name is dan , i`m from romania, from the european capital of culture sibiu and this is my first topic. I bought this summer a husa fe 400 1999 from germany , on ebay, and after brought it to romania an exaut valve broke.i didn`t got the chance to ride it instead i had to replace...

Hello all; I am looking for any advice on aforementioned model. I am new to Husabergs (have owned many Jap bikes & two KTM's) I have found a very nice example in excellent condition, but am nervous because I have heard conflicting reports. Some say all pre 2003 "Husy's" are problematic; Local...

Hey guys and gals, i'm looking into buying a 1999 FE400. I'm new to berg's so i don't know what i should look for in these bikes. If anyone can tell me things to look out for and what are the problems with this yr of bike would be awesome. Thanks for the response Kenny