T Treebar Joined Sep 2016 2 Posts | 0+ Chico ca Discussion Starter Sep 25, 2016 #1 1996 Husaberg 400 hot start issues any help out there
T Treebar Joined Sep 2016 2 Posts | 0+ Chico ca Discussion Starter Sep 25, 2016 #2 Please help It starts up great with one kick maybe two when it's cold but as soon as it warms up it starts to die at idle once it dies it's almost impossible to restart until it cools down any ideas
Please help It starts up great with one kick maybe two when it's cold but as soon as it warms up it starts to die at idle once it dies it's almost impossible to restart until it cools down any ideas
tourist Joined Nov 2012 2K Posts | 821+ Iceland Sep 25, 2016 #3 as I recall, my countryman 'gthth' traced something like this to the stator!
Damo W Joined Aug 2016 166 Posts | 85+ NSW Australia Sep 25, 2016 #4 Agreed with tourist but I'd check them valve clearances too. It's not something silly like the choke? Last edited: Sep 25, 2016
Agreed with tourist but I'd check them valve clearances too. It's not something silly like the choke?
ned37 Joined Dec 2004 2K Posts | 247+ back in cottonwood, az Sep 26, 2016 #5 a lot of the time, it's because it is too rich on pilot. turn in the fuel screw a half turn
Taffy Joined Nov 2001 17K Posts | 773+ Ely, England Sep 26, 2016 #6 agree with all the above. check for tight valve clearances and rich carb the rich carb can be fuel screw but probably just a plain worn atomiser, needle and fuel valve tired. Taffy
agree with all the above. check for tight valve clearances and rich carb the rich carb can be fuel screw but probably just a plain worn atomiser, needle and fuel valve tired. Taffy