This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hello from Portugal

Joined Aug 2024
2 Posts | 0+
Portugal
Sorry for my English in advanced 😅
I'm a proud owner of a new to me old husa 400 fe 1999 ( i think? more on that )
I've been riding bike ten plus years but i never had a dirt bike .
I finaly found one with plates
I went to check and every thing was fine and i bought it 1500 euros a bargain i think even now.
Got it home and now im starting to take it apart and replace,clean, lube it.
I was blown way by the quality of the material in general.

I hope i can help and to find help
 

Attachments

  • Screenshot_2024-08-16-17-36-49-246_com.facebook.katana.jpg
    Screenshot_2024-08-16-17-36-49-246_com.facebook.katana.jpg
    277 KB
  • Screenshot_2024-08-16-12-30-31-352_com.facebook.katana.jpg
    Screenshot_2024-08-16-12-30-31-352_com.facebook.katana.jpg
    258.5 KB
  • Screenshot_2024-08-16-17-36-57-366_com.facebook.katana.jpg
    Screenshot_2024-08-16-17-36-57-366_com.facebook.katana.jpg
    219.8 KB
  • Screenshot_2024-08-16-17-36-55-169_com.facebook.katana.jpg
    Screenshot_2024-08-16-17-36-55-169_com.facebook.katana.jpg
    367.9 KB
  • Screenshot_2024-08-16-17-36-52-860_com.facebook.katana.jpg
    Screenshot_2024-08-16-17-36-52-860_com.facebook.katana.jpg
    360.6 KB
Very nice! It is a 2000 model bike because it has the later frame and also it has the hydraulic clutch which it only got for its last year; 2000

Cheers

Taffy
 
  • Like
Reactions: Forgt
Very nice! It is a 2000 model bike because it has the later frame and also it has the hydraulic clutch which it only got for its last year; 2000

Cheers

Taffy
I Saw that was something wrong because from the license plate it shows that is from october 99.
But thanks you for the confirmation

Today i clean the carb and Change the fuel lines, they were all hard and breaking i also Open the Starter and regrease the bearing and clean the contact points but after that i Saw that the Starter clutch tomorow i gona Open the engine and see if i can repair the One way bearing i have a few from old bikes, maybe putting new bearings and spring Will do the trick .
That cow is hard to get it started 🤣 i still didnt tune the carb i but the air screw was prety much closed i thing the normal is like 2 turns out more or less
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions