Hello from Portugal

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 15, 2024
Messages
2
Location
Portugal
Sorry for my English in advanced 😅
I'm a proud owner of a new to me old husa 400 fe 1999 ( i think? more on that )
I've been riding bike ten plus years but i never had a dirt bike .
I finaly found one with plates
I went to check and every thing was fine and i bought it 1500 euros a bargain i think even now.
Got it home and now im starting to take it apart and replace,clean, lube it.
I was blown way by the quality of the material in general.

I hope i can help and to find help
 

Attachments

  • Screenshot_2024-08-16-17-36-49-246_com.facebook.katana.jpg
    Screenshot_2024-08-16-17-36-49-246_com.facebook.katana.jpg
    277 KB
  • Screenshot_2024-08-16-12-30-31-352_com.facebook.katana.jpg
    Screenshot_2024-08-16-12-30-31-352_com.facebook.katana.jpg
    258.5 KB
  • Screenshot_2024-08-16-17-36-57-366_com.facebook.katana.jpg
    Screenshot_2024-08-16-17-36-57-366_com.facebook.katana.jpg
    219.8 KB
  • Screenshot_2024-08-16-17-36-55-169_com.facebook.katana.jpg
    Screenshot_2024-08-16-17-36-55-169_com.facebook.katana.jpg
    367.9 KB
  • Screenshot_2024-08-16-17-36-52-860_com.facebook.katana.jpg
    Screenshot_2024-08-16-17-36-52-860_com.facebook.katana.jpg
    360.6 KB
Very nice! It is a 2000 model bike because it has the later frame and also it has the hydraulic clutch which it only got for its last year; 2000

Cheers

Taffy
 
Very nice! It is a 2000 model bike because it has the later frame and also it has the hydraulic clutch which it only got for its last year; 2000

Cheers

Taffy
I Saw that was something wrong because from the license plate it shows that is from october 99.
But thanks you for the confirmation

Today i clean the carb and Change the fuel lines, they were all hard and breaking i also Open the Starter and regrease the bearing and clean the contact points but after that i Saw that the Starter clutch tomorow i gona Open the engine and see if i can repair the One way bearing i have a few from old bikes, maybe putting new bearings and spring Will do the trick .
That cow is hard to get it started 🤣 i still didnt tune the carb i but the air screw was prety much closed i thing the normal is like 2 turns out more or less
 


Write your reply...

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top