Joined Nov 2001
17K Posts | 774+
Ely, England
RE: gasket thickness
sometimes i could crown you lot for the help i get!!!!!
from the doc:
===== <u>Thicker headgasket - OEM</u> =====
21 200 319-01 Cylinderhead gasket 400 (thick) -01
21 200 231-01 Cylinderhead gasket 400 -02
21 200 320-01 Cylinderhead gasket 501 (thick) -01
21 200 232-01 Cylinderhead gasket 501 -02
21 200 321-01 Cylinderhead gasket 470/550/650 (thick) -01
21 200 233-01 Cylinderhead gasket 470/550/650 -02 (joeUSA)"
regards
Taffy
sometimes i could crown you lot for the help i get!!!!!
from the doc:
===== <u>Thicker headgasket - OEM</u> =====
21 200 319-01 Cylinderhead gasket 400 (thick) -01
21 200 231-01 Cylinderhead gasket 400 -02
21 200 320-01 Cylinderhead gasket 501 (thick) -01
21 200 232-01 Cylinderhead gasket 501 -02
21 200 321-01 Cylinderhead gasket 470/550/650 (thick) -01
21 200 233-01 Cylinderhead gasket 470/550/650 -02 (joeUSA)"
regards
Taffy
Joined Nov 2001
17K Posts | 774+
Ely, England
RE: gasket thickness
hi ned
well if you followed any of the sherco thread you'll know that to get the chain to fit all i had to do was remove the headgaket and when fractions short i swopped for a few moments back to the old 'mickey mouse' yellow tensioner blade. the chain fitted. i know that a headgasket is 1.25mm and can't work out the blade. i think 2mm off would do it but i have to remove 3mm if i get the 450 con rod (117mm to my 400s 120mm).
the thicker headgasket would be my get out of jail card.
maybe they have discontinued these parts but i would say that they were important to any tuner.
regards
Taffy
hi ned
well if you followed any of the sherco thread you'll know that to get the chain to fit all i had to do was remove the headgaket and when fractions short i swopped for a few moments back to the old 'mickey mouse' yellow tensioner blade. the chain fitted. i know that a headgasket is 1.25mm and can't work out the blade. i think 2mm off would do it but i have to remove 3mm if i get the 450 con rod (117mm to my 400s 120mm).
the thicker headgasket would be my get out of jail card.
maybe they have discontinued these parts but i would say that they were important to any tuner.
regards
Taffy
Joined Dec 2004
2K Posts | 248+
back in cottonwood, az
RE: gasket thickness
ohhh, taffy, ur makin my head hurt :bash:
but shouldn't you be able to get a source for a copper sheet in various thicknesses so that you could make up what you want? or are you trying to get it thinner? then milling would be in order. boy, a lot of variables are gonna change.
ohhh, taffy, ur makin my head hurt :bash:
but shouldn't you be able to get a source for a copper sheet in various thicknesses so that you could make up what you want? or are you trying to get it thinner? then milling would be in order. boy, a lot of variables are gonna change.
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up