This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Exhaust Question

lhf

Joined Feb 2002
36 Posts | 0+
Germany
Hello guys,
i'm looking for a DOMA or FP exhaust system for my FC450 04.
Who of you has one of these on his post 01 model?
What ist your experience?
Can you put some pictures into your gallery?
I specially would like to see the headers because my front tire is rubbing the right one on the stock system.

thanks

Juergen
 
Hello Juergen,
can't help with the exhaust but I thought I read somewhere on the forum that the early models had the " tire rubbing" problem. The headers were modified and exchanged, maybe something to check with your dealer.
Regards, Jeroen
 
Rubbing right side header?

Why is the tire rubbing the header/ Is it stopping,you from winning if not find a better tire that works or did you change any thing to make it rub?
 
Hi,
I changed nothing on the bike. The tire is touching the right header when using the whole front wheel travel. It is not a huge problem, but after riding on a motocross track you can see a little bit of black rubber on the header surface.
When i buy a new exhaust system i just want to see if other suppliers do a more intelligent routing of the headers.
Who has an DOMA or a FP pipe?

Juergen
 
if i may digress slightly for a moment...

how many factories can lay claim to the amount of changes that husaberg have made in the last four years?

IHF, there can barely be a part that mattighofen hasn't worked on!

the more i see of these changes the more i realise the amount of hours and labour that the ktm group puts in is infact stupendous!!!!

i'm becoming less and less convinced that we get a rough deal and that they're 'crap at their job'. i think they're the kind of company that has made 1,000 changes, two have gone wrong (out of that lot) and they have another 20 serious jobs to attend to.

but for '04 you can't say the bikes haven't gone forward miles. i get the feeling that all these things have been on a swedish easil and finally someone can afford to make them.

Taffy
 
found a factory that makes exhausts for the Husabergs. It is Remus in Austria www.remus.at . Here is a picture:
http://www.husaberg.org/modules.php?set ... _photo.php
The can is titanium. The header routing is different to the stocker, so the front wheel is free on full travel. Wheight is about 500grams (1 pound) lighter than stock.
See some pics in my gallery.
I've just finished the assembly, have not ridden jet.

cheers
JUERGEN
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions