This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dodged a Huge Bullet Today

Joined Mar 2004
89 Posts | 0+
San Diego, CA
The good ol' 650 Berg was making more noise than usual on the way back to the truck a few weeks ago. I know they usually sound like they are going to fly apart however; it sounded a little worse... I removed the left side cover and would ya believe, the crank nut was finger-tight. I have about 125 hours/4100 miles on the bike, so have a look inside if any of you are starting to creep up on 100 hours.
 
this is a common fault. do a search on this.

i believe that the nut tightens down to the end of the thread and doesn't get to the gear. you need to add a washer i think.

this is off the top of my head!

regards

Taffy
 
There was a recall in 05 for this issue. Your dealer should be able to check which models were affected by the VIN #. If your dealer has never heard of this issue check with BOSS as he has the info.
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions